• The ResMed S8 Elite Includes the new EPR (Expiratory Pressure Relief) mode which drops the pressure upon exhalation so that breathing feels more “natural”.

• Choice of fixed CPAP or EPR mode for maximum comfort with control. Adjustable EPR settings. Pressure Ramp is available in CPAP mode providing for a slow and comfortable increase to your pressure setting.

• The S8 Elite offers superior features and greater comfort than standard CPAP machines, which often leads to better compliance.

• Fully customizable reminders for accessory replacements (mask, filters, etc.) and provider callbacks adding to the overall convenience of the S8 Elite machine.

• Comprehensive efficacy and usage data helps you monitor critical trends, with breath by breath compliance.

• Remote downloading capabilities with ResScan Data Card simplifies follow-up and allows for complete tracking and easy monitoring of patient therapy and compliance.

• Compact and robust, the design of the S8 Elite is portable and user-friendly, including Auto Altitude Adjustment to make sure the correct pressure is delivered when you travel.

• Inbuilt power supply and auto mains switching or DC input is ideal for travel.

• Ramp and settling options enhance comfort and help improve compliance.

• Pressure 4 to 20 cm H2O
• Ramp Time 0 to 30 min. (5-min. increments)
• Starting Ramp Pressure 4 to CPAP; user adjustable
• Dimensions 4.4” x 6.5” X 5.7” (112mm x 164mm x 145mm)
• Weight 2.9 lbs
• Filters Pollen
• Device Set-Up LCD/Keypad
• Data Storage Capacity Display:365 days summary data and 5 nights detailed data (up to 500 events per session. Data Card: 180 days of summary data and 5 nights detailed data (up to 200 events per session)
• Electrical Requirements 100 – 240 V, 50/60 Hz; 110 V, 400 Hz; 2.5A <140 VA (110W)(maximum power consumption). Instantaneous peak power consumption <340VA
• Humidification Integrated Heated Humidifier and Pass-over Humidifier
• DC Power Only use DC-12 Converter by ResMed for DC input or damage may occur.
• Warranty 2 Year Manufacturer (Return to dealer for processing)

CPAP machines come with a six foot hose and a travel bag. Masks are not included and must be purchased separately. We will be happy to help you with sizing and offer suggestions on current popular masks.

A ResMed DC-12 Converter For S8 Machines must be used with the 12 volt jack. Any other cable will likely cause a machine failure. You can find this item on our site.

Do not run this machine on a regular AC to DC inverter. A pure sine wave inverter must be used. We sell these on the website.

SmartStart enables your device to start automatically by breathing into the mask. Leak alert indicates when a high mask leak is present.

If you have enabled Leak Alert, the SmartStart feature automatically becomes disabled. You cannot have both features enabled.

All S8 and S8 II CPAP Machines utilize a "Cool Down" feature that runs the CPAP Motor up to 1 hour after turning the machine off. The motor helps to cool off the humidifier plate. You may hear a "faint blowing sound" when you turn the machine off. However, you can unplug the power cord and allow the heater plate to cool without airflow.