The M Series Plus with C-Flex and SmartCard Module gives patients and doctors the convenience of remotely monitoring therapy effectiveness. The M Series Plus with SmartCard Module allows users to take the SmartCard to a doctor with Encore Software, where they can make changes to (pressure, ramp, and other features) from the office without actually having the machine present.

The M Series Plus is convenient for travel and can act as a backup unit to the M Series Pro or Auto. The standard travel carry case has been updated with a new sleeker look.

The plus offers lighted primary touch controls for power, ramp, and C-Flex as well as a LCD display and controls for advanced reporting and set up.

The optional integrated humidifier has simple controls and an easy to turn humidification dial. The water chamber is easy to remove, fill, replace, and delivers continuous humidification throughout the night.

Universal Power

The M Series Plus operates automatically between 110v – 240v AC. When traveling either inside or outside the USA, there are no switches to switch or fuses to change. The machine will automatically sense what voltage is needed and set itself to run on the power needed.

The user will need to adapt the plug that goes into the wall to fit the style of outlet socket that is being used. This is simply done with a Power Adapter Plug kit. This is the same type of plug adapter that would be used with a hair dryer or an electric shaver.

World Traveler Power Adapter Plugs.

DC Power (Cigarette Lighter Adapter)

The M Series Plus equipped with a DC plug on the back of the unit. This allows the user to connect the CPAP to an external DC battery source.

Using a Respironics, 12volt DC Power Cord the M Series Remstar Plus can be powered by plugging into a cigarette lighter plug. This is ideal for traveling by car, boat, or recreational vehicle that is equipped with a cigarette lighter plug.

Respironics, 12volt DC Battery Adapter Cable

DC Power (Marine Deep Cycle Battery)

It is recommended that you use a 100 amp hour, 12v DC deep cycle marine battery for operating you CPAP machine when not connected to 110v AC /230v AC.

There are two cables needed to configure the M Series Plus with a Marine Deep Cycle Battery. They fit together to make a connection from the back of the M Series Remstar Plus to the battery clip terminals on the marine battery.

Here are the links to the cables needed to hook up to a marine style battery. Both cables are needed.

Respironics, 12volt DC Power Cord (to connect CPAP to cigarette lighter socket)

Respironics, 12volt DC Battery Adapter Cable (to connect to battery terminals)

Respironics Battery Pack

The Respironics Battery Pack has been a long standing favorite of our customer’s. It weighs in at 13lbs and can be carried easily with its shoulder strap.

This battery pack will give roughly 26 hours of use, depending on the cpap pressure setting. (Results may vary.)

Respironics Battery Pack

* The Respironics Battery Pack must be charged with shore power. This unit can be charged at voltages ranging from 115v – 230v.

• Pressure 4 to 20 cm H2O
• Ramp Time 0 to 45 min. (5-min. increments)
• Starting Ramp Pressure 4 to CPAP; user adjustable
• Dimensions 7.5” L x 5.0” W X 3.125” H (19cm L x 12.7 cm W x 7.9 cm H)
• Weight 2.2 lbs
• Filters Pollen and optional ultra-fine
• Device Set-Up LCD/Keypad and Encore Pro SmartCard
• Data Storage Capacity Display: 7 and 30 day averages (minimum) SmartCard (optional): 9 months a 3 usage sessions per day
• Data Storage Content SmartCard: Date/time, hours of use, usage patterns, FOSQ, Compliance Monitoring, Breathing detection
• Manual Altitude Compensation (low, medium or high)
• Electrical Requirements 100 – 240 VAC, 50/60 Hz (An adapter may be needed to plug the CPAP into a wall outlet outside the US.)
• Humidification Integrated Heated Humidifier and Pass-over Humidifier
• DC Power Direct connect cord, 12 VDC
• Warranty 2 Year Manufacturer (Return to dealer for processing)
• Special User Features Lighted LED’s, Auto on/off, mask off alert

The Remstar M Series Heated Humidifier is an option item and is not included, but can be purchased separately.

The EncoreViewer Software is an option item and is not included, but can be purchased separately.

While this product comes with a smart card, it supports only compliance data. Those seeking efficacy data from a machine in this line should purchase the M Series Pro (DS400).