S9™ Series Humidaire H5i™ Heated Humidifier with Climate Control

ResMed has re-invented the Humidaire line of CPAP humidifiers. The Humidaire H5i incorporates an intelligent humidity controlling technology, Climate Control. The humidifier integrates and is powered by ResMed S9 Series Machines with no extra outlets or additional power supply needed. Set the simple Dial Control to the desired temperture and let the (optional) ClimateLine tubing provide a new level of control.

Key Product Features

• Intuitive Design
• Climate Control Technology
• (Optional) ClimateLine Tubing
• Warm-Up Indicator
• Flip-top lid design
• (Optional) Dishwasher Safe, High Volume Water Chamber

Climate Control Technology

Humidification is managed through a combination of the S9 machine, H5i humidifier and (Optional) ClimateLine heated tubing. There are five sensors throughout the system that monitor ambient temperature and patient airflow:

• Flow Sensor in S9 Series machine
• Heater Plate Sensor
• Ambient Temperature Sensor on H5i
• Humidity Sensor on H5i
• Mask Temperature Sensor Built into the ClimateLine Tubing

The (Optional) ClimateLine heated tubing uses a built-in mask temperature sensor to optimize relative humidity at the mask. Sensors inside and outside the CPAP machine closely monitor changes in humidity and help prevent condensation from forming inside the tube.

(Optional) ClimateLine Tubing

The (Optional) ClimateLine Tubing has an internal heated coil and mask temperature sensor that stops rainout in the the hose. Climate Control algorithms measure temperatures from the humidifier to prevent such condensation from forming. The (Optional) ClimateLine Tubing can use the (Optional) SlimLine Tubing Wrap to prevent that "plastic on skin" feeling.

Warm-Up Indicator

ResMed has incorporated a Warm-Up feature for the H5i heater plate. Users can now navigate the S9 display to the Humidity Level icon and preheat the H5i heater plate by holding down the Push Dial for 3 seconds. A Warming Up icon with a progress bar appears on the machine's display, indicating how long until the heater plate will reach full temperature.

(Optional) Dishwasher Safe Water Chamber

The Humidaire H5i is a sleek design that snaps right onto the S9 machines. For added convenience, the flip-top lid allows users to fill the water chamber without removing the tubing. The chamber itself has a high water capacity of 380mls and is very efficient.

Another great feature is the (Optional) dishwasher-safe chamber's ability to be disassembled and washed in a high temperature environment like a dishwasher. Now a standard feature, the chamber's useful life can last longer than the 6 month recommended replacement for sealed chambers.

For more information on all these technologies, check out ResMed's Tech Fact Sheet.

Performance

Maximum Heater Plate Temperature 149 deg F (65 deg C)

Temperature Cut-Out 165 deg F (74 deg C)

Maximum Gas Temperature =< 105 deg F ( =< 41 deg C)

Dimensions (H x W x D)

Chamber and Docking Station 6" x 5.7" x 3.4"
(153 mm x 145 mm x 86 mm)

Weight

Docking Station and Unfilled Sealed Water Chamber 670 g (1.48 lb).

Docking Station and Unfilled Cleanable Tub 770 g (1.7 lb).

Power Supply Input Range

100-240V, 50/60Hz; 110V, 400Hz; 2.5A < 140 VA (110 W) (maximum power consumption).

Maximum heater element power: 90 Watts.

Housing Construction

Docking Station: Flame retardant engineering thermoplastic, plated cast aluminum.

Sealed Water chamber: Injection molded plastic, aluminum and thermoplastic elastomer.

Cleanable Tub: Injection molded plastic, stainless steel and silicone seal.

Water capacity to maximum fill line: 380 mL

Environmental Conditions

Operating Temperature: +41 deg F to +95 deg F

Operating Humidity: 10-95% non-condensing

Storage and Transport Temperature: -4 deg F to +140 deg F

Storage and Transport Humidity: 10-95% non-condensing

IEC 60601-1 Classification

Class II (double insulation)
Type CF

Electromagnetic Compatibility

Product complies with all applicable electromagnetic compatibility requirements (EMC) according to IEC60601-1-2, for residential commercial and light industry environments.

The H5i Heated Humidifier does not include the ClimateLine Heated Hose.

The S9 Series can use (2) different Power Supply units, a 30 Watt or 90 Watt external brick. S9 machines come standard with a 90 Watt Power Supply that can power the CPAP machine and Humidifier. The 30 Watt Power Supply will only operate the CPAP machine and the humidifier will act as a passover.

For cleaning instructions, visit the H5i Disinfection Guide.

For additional help, visit the H5i Quick Reference Guide.

All S9 Series machines utilize a "Cool Down" feature that runs the CPAP Motor up to 1 hour after turning the machine off. The motor helps to cool off the humidifier plate. You may hear a "faint blowing sound" when you turn the machine off. However, you can unplug the power cord and allow the heater plate to cool without airflow.