Product Images

CPAP.com Battery Kit for IntelliPAP Machines

Are you concerned about not being able to use your cpap machine in the event of a power failure? Are you interested in taking your cpap on weekend getaway, vacation, or camping where there is no electricity? At last there is a convenient, cost effective way to run your cpap machine from an external battery source, that is less than half the weight and size of any cpap battery pack in its class.

CPAP.com is proud to bring you the smallest, lightest (2.5 lbs), cpap battery pack on the market.Please see below for the list of compatible machines for this battery kit.

Manufactured by cpap.com.

$279.99

5 of 5 5 Reviews

Item #CPAP-BATTERY-4: 15 in stock

Available to Ship: Tomorrow

Have a question? Call us!

1-800-356-5221(Mon-Fri 8AM-10PM CST, Sat 8AM-6PM CST)

Product Features

Small & Lightweight. The 2.5 lb CPAP.com Battery Pack is surprisingly small and lightweight. It features robust power that is rarely seen in battery packs twice its size and weight.

Lithium Ion Battery. This battery does not have typical "Battery Effect" issues, where you must discharge the battery before you can recharge. The lithium ion battery can be recharged at any discharge level without losing charge time due to battery memory loss. Using sophisticated circuitry, the battery pack is specially designed to limit the unit from under charging and over charging.

Approved for Travel. This battery has been approved by the United Nations and Department of Transportation as tested safe for travel.

Estimated Run Times. Please see the "Machine Pressure and Battery Performance" feature below to estimate the battery run time for your machine at your pressure setting. Using a heated humidifier on a 12volt battery power source will significantly reduce the amount of power provided. In most cases, usage is reduced to less than half the estimated operational time. CPAPs or BiPAPs requiring inverters reduce the power time even more.

Compatible Machines. This battery kit comes with the CPAP.com battery and the IntelliPAP 12 volt DC Power Cord. If you have any questions call our toll free number 800-356-5221 for assistance from a CPAP expert. The following machines are compatible for this kit:

Return On Warranty Issues Only

Machine Pressure and Battery Performance *Note: This is a battery life estimation based on the battery and the machine. Each machine has unique power needs. Look for the Battery kit that has all the cables needed to safely run your machine. Please always read the "Important Tips" tab for further information on battery use. Select Machine:

Important Tips

This battery kit comes with the CPAP.com battery and the IntelliPAP 12 volt DC Power Cord.

The CPAP.com Lithium Ion Battery Pack is compatible with any cpap machine that has a 12v DC input. This includes Respironics Remstar Series, Respironics M Series, Puritan Bennett 420 series and Resmed's S8 series cpap machines.

The CPAP.com Lithium Ion Battery Pack must be charged using the included specially designed battery charger. Using any other charger may damage the battery and become a fire hazard. The battery pack must be recharged using standard AC 110v to 240v power, and cannot be recharged off of a battery or solar source. The battery pack is shipped with a minimal charge and must be charged for a 8 hours before it can be used for the first time.

The CPAP.com Battery Pack will not work with the Pure Sine Wave Inverter. If you want to use a CPAP.com Battery and need a means of charging the battery while camping outdoors, use the 400 Watt DC to AC Power Inverter with your car, generator, or RV.

REGARDING HEATED HUMIDIFIERS:

Using a heated humidifier on a 12volt battery power source will significantly reduce the amount of power provided. In most cases, usage is reduced to less than half the estimated operational time. CPAPs or BiPAPs requiring inverters reduce the power time even more.

Please note that some heated humidifiers are not capable of being operated on 12volt battery power sources. The later M Series heated humidifiers with the 6'' 'pigtail' connectors are capable of running on 12volt DC power sources. Earlier model M Series heated humidifiers without the pigtail are not 12Volt capable, nor are the Legacy model REMstar and stand-alone H2 humidifiers.

For optimum performance of your battery pack, plan to use your CPAP without the heated humidifier. You may also have the humidifier connected and filled with water, but without the power turned on. This changes a typical heated humidifier into a passive humidifier.

We suggest purchasing your battery pack far enough in advance so that the battery can be tested with the your CPAP machine. To determine the actual amount of power time you will receive and whether or not heated humidification is required for your comfort, test the battery at home before traveling.

CPAP Product Customer Reviews

Sort: Show Star Rating:

1

Ruben O, NJ – August 31, 2010

"the best thing you guys have done, super, thank you."

Battery Kit

Janice C, GA – August 20, 2010

"Great for camping!! Fit great in my Kayak"

Michelle L, MI – June 16, 2010

"Great product to use your cpap on the go."

Worked great

John V, CA – May 02, 2010

"Only used once but worked great. The battery is not as large as you would think."

As advertized

John A, Cochranville, PA – September 01, 2009

"I haven't had to use the battery pack yet as there have been no lengthy power outages, but it appears to work very well. I'll be giving it an all-night test soon. I'm amazed the battery is so small, light even. I was picturing a truck battery.

One thing, the car outlet-sized connectors are huge, and yet don't offer a car charging option. Perhaps in future a smaller connector might be envisioned. It's only 12 volts here. It would improve portability."

Purchase this on CPAP.com? Add Your Review

1

CPAP Learning Center

Frequently Asked Questions (FAQs)

What type of power does my CPAP need?

Most CPAP and BiLevel machines today are designed to operate on both AC and DC battery currents. In the United States, the AC current from wall outlets is 110 volt and most batteries produce 12 volt DC current. Overseas, the AC current is usually 220 or 240 volt.

We include information about the power needs and capacities in the description of our products. Please see the "Power" tab on any machine product page for this information. You can also see a summary of the voltage range and whether it is DC capable on our Compare Charts.

Will my CPAP operate on DC / battery power?

All CPAPs will operate on DC power with the use of an inverter to change the current from DC to AC before it reaches the machine. However, many will operate on DC power without the need for an inverter, just a power cord that plugs into the CPAP and ends in a cigarette lighter plug.

Inverters do require a lot of power. If you need to use an inverter to run your machine on battery power, the inverter will probably take about half the life off the battery.

To determine if your CPAP will operate without an inverter, look for a DC outlet on the machine, either at the back or on the side, with a single opening directly in the center. It should be labeled "DC Power" or similar term. You can also review our Compare Charts to see if your machine has a optional DC cable option.

Will my CPAP operate overseas?

An adapter may be required to plug a US power cord into a wall outlet in a foreign country. CPAP.com sells an assortment pack of World Traveler Power Adapter Plugs, which allow CPAP machines to plug into different types of wall sockets found in different countries.

All the models CPAP.com sell contain power converters that enable the machine to operate on any AC current from 100 to 240 volts without any adjustment. Check with your dealer or manufacturer to see if your machine needs an external converter that lowers the voltage from 240 to 120 VAC.

How do I use a battery to operate my CPAP?

First you need to determine if your machine is configured to operate on DC power and has a DC power outlet. If your machine does have a DC power outlet and you want to run your marine battery, then you will need the correct DC cable for your machine and an adapter cable that fits over the cigarette lighter plug and ends in alligator clips.

CPAP.com sells complete battery kits with everything you need for your machine including the right cables for your machine and the battery. You can find the right battery kit for your machine here.

If your machine does not have a DC power outlet, then you will also need an inverter to be able to run your machine on battery power.

If you have questions about the specific power needs of your machine, review the "Power" tab on your machine's product page, or give us a call at 1-800-356-5221.

What type of battery should I use?

For longer battery use, we suggest a deep-cycle marine battery. A CPAP set at 10cm will usually run for about three nights before having to recharge a deep cycle marine battery. A car battery will usually run a machine for 8 hours and still start the car.

There are small, portable battery packs that will operate a CPAP set at 10cm for at least one night, or about eight hours. CPAP.com sells full battery kits that come with everything needed to run your machine off battery power including the right cables needed for your machine and a battery. You can find the battery kit for your machine here. On each battery kit page, you can input your machine and pressure setting to see an estimate battery life for your machine.

How do I prepare for power outages with CPAP?

There are a lot of back up battery choices out there that can give you peace of mind in case of a power outage. Some machines offer the option of an integrated battery which will automatically fail over to battery power if the power goes out.

CPAP.com sells battery packs to accompany your machine if an integrated battery is not available. Visit CPAPtalk for more advice specific to your needs, or view this past thread on the topic here.

Product Images

CPAP.com Battery Kit for IntelliPAP Machines

Product Features

Machine Pressure and Battery Performance

Specifications

This Product Includes...

Product Specifications

Important Tips

CPAP Product Customer Reviews

Ruben O, NJ – August 31, 2010

Battery Kit

Janice C, GA – August 20, 2010

Michelle L, MI – June 16, 2010

Worked great

John V, CA – May 02, 2010

As advertized

John A, Cochranville, PA – September 01, 2009

CPAP Learning Center

Frequently Asked Questions (FAQs)

What type of power does my CPAP need?

Will my CPAP operate on DC / battery power?

Will my CPAP operate overseas?

How do I use a battery to operate my CPAP?

What type of battery should I use?

How do I prepare for power outages with CPAP?

Assistance

Order Info

Community

Our Company

Product Images

CPAP.com Battery Kit for IntelliPAP Machines

Product Features

Machine Pressure and Battery Performance

Specifications

This Product Includes...

Product Specifications

Important Tips

CPAP Product Customer Reviews

Ruben O, NJ – August 31, 2010

Battery Kit

Janice C, GA – August 20, 2010

Michelle L, MI – June 16, 2010

Worked great

John V, CA – May 02, 2010

As advertized

John A, Cochranville, PA – September 01, 2009

CPAP Learning Center

Frequently Asked Questions (FAQs)

What type of power does my CPAP need?

Will my CPAP operate on DC / battery power?

Will my CPAP operate overseas?

How do I use a battery to operate my CPAP?

What type of battery should I use?

How do I prepare for power outages with CPAP?

Assistance

Order Info

Community

Our Company

Sign Up for Our Newsletter