Control III Disinfectant CPAP Cleaning Solution - Home Care Kit

Product Features

Specifications

Product Specifications

• 8 am to 10 pm CST Toll Free Phone and Email Support
• 24 hour access to our CPAPtalk.com Support Forum
• Learning Center for information on sleep apnea and cpap equipment
• Consumer Purchasing Trends Reports
• Product Evaluation Results from our Product Challenges
• Warranty Services for all items purchased through CPAP.com
• Insurance Compliant Invoices
• Free Prescription Request System

Important Tips

CPAP Product Customer Reviews

CPAP Video & FAQ

Videos

Frequently Asked Questions (FAQs)

What is Control III Disinfectant Germicide?

This is a hospital grade germicide and disinfectant. It contains an extremely effective formula that has two unique quaternary compounds that act as a broad-spectrum disinfectant.

Is Control III used extensively for respiratory therapy home care?

Nationally, Control III is the trusted product of choice for disinfecting home care respiratory supplies and equipment.

Is Control III environmentally friendly?

Yes, it is. Control III breaks down quickly when released in septic or sewer systems and does not cause harm to human, plant or animal life.

How long will Control III last?

The concentrated form, in the original container, has a 5 year shelf life.

However, once the diluted solution of one ounce of Control III to one gallon of water has been mixed, it can be used for up to 14 days. If the diluted solution becomes noticeably dirty then it should be changed sooner, even if 14 days has not passed. The Home Care Kit comes with Control III Test Strips which once immersed in the diluted solution will change color to indicate if the solution is still active and effective.

Is it effective against spores?

No, it does not kill any spores.

How does Control III kill bacteria without being highly toxic?

Toxicity does not determine bactericidal effectiveness. The active ingredients in Control III attack the core structure of the bacterium by a chemical method of action while simultaneously having a low toxicity level.

Is it effective in killing Tuberculosis?

No, it does not kill Mycobacterium tuberculosis. However, it is effective against many other common bacterium.

Does it irritate the eyes and skin?

The concentrated form of Control III, as it comes straight out of the bottle, is a primary irritant to the eyes and skin. Direct contact of the eyes or skin with the concentrated form of Control III Disinfectant should be avoided.

However, once mixed with water per the instructions, the diluted solution is not an irritant to the skin or eyes.

If you do get it in your eyes, rinse thoroughly for 15 minutes with water. If redness or irritation continues, please contact a doctor.

Does the equipment need to be pre-cleaned prior to disinfecting?

The most vital step in the disinfection of your equipment is proper pre-cleaning. It removes the initial dirt and grime or other matter which may have caused contamination of the equipment. Once pre-cleaned, all items should be rinsed thoroughly with fresh water before disinfection.

What should be used as a pre-cleaning agent?

A mild detergent such as regular baby shampoo or a liquid dishwashing detergent without moisturizers or anti-bacterial ingredients should be used to pre-clean the equipment. Do not use bar or liquid hand soap. After the pre-cleanse, rinse all of the items to be disinfected with fresh water and then immerse in the diluted Control III solution. The proper dilution ratio for disinfecting home care respiratory equipment or supplies is one ounce of Control III concentrate per one gallon of water.

What kind of container should be used to soak the equipment?

It is recommended to use a polyethylene plastic container for the soaking required for disinfection. This type of bucket is available in the Control III Home Care Kit. When not in use, the solution should be kept in an air tight container to reduce the chance of evaporation and contamination. PVC containers are not recommended because after extended exposure to the Control III solution they may become tacky feeling.

How long is it advised to soak the items for proper disinfection?

The soak time required by the EPA (Environmental Protection Agency) is 10 minutes. Soaking the items longer will not provide any greater levels of disinfection but will also not cause harm to the equipment. If natural rubber or PVC materials are soaked longer than 20 minutes undesirable results may occur such as a tacky feeling to the items. This is not harmful in and of itself but is probably something that would be displeasing.

Is it necessary to rinse the items after disinfecting?

After a 10 minute immersion in the Control III solution the equipment should be rinsed with hot tap water and allowed to air dry. If not using the disinfected equipment shortly afterwards, it should be covered with a clean towel until use or stored in a sealed container or a plastic bag.

Is Control III concentrate harmed by temperature extremes?

No, exposure to excessive heat or cold will not harm the Control III Disinfectant. If such exposure occurs, then naturally allow the concentrate to return to room temperature and then shake vigorously before use.

How long will Control III last?

The concentrated form, in the original container, has a 5 year shelf life.

However, once the diluted solution of one ounce of Control III to one gallon of water has been mixed, it can be used for up to 14 days. If the diluted solution becomes noticeably dirty then it should be changed sooner, even if 14 days has not passed. The Home Care Kit comes with Control III Test Strips which once immersed in the diluted solution will change color to indicate if the solution is still active and effective.

How do I care for my mask?

Masks should be washed daily in warm water with baby shampoo and left to air dry. Never use antibacterial soap as it will break down the silicone of the mask. Avoid soaps with lotion or lanolin which can coat the mask and cause it to lose its seal. A safe cleaner is the Control III Disinfectant CPAP Cleaning Solution. Remember to go to bed with a clean face, this will improve your seal and protect the lifespan of your mask.
The best time to clean your mask is in the morning so that the oils from your skin are removed. We recommend using mask wipes to make daily morning cleanings easy. The mask wipes are made from materials that will not break down your mask.