This is the European 230V HC150 Heater Plate Only. Chambers and humidifier hose sold separately. The entire kit can be found by searching for part number HC150PACKAEU.
This will not work with Domestic U.S. 110v power.
Works with most machines. See below for more details.
Specifications
Product Specifications
Operating Temperature:
30° C to 65° C
(86° F to 149° C)
Operating Voltage:
230 +- 20v
Dimensions:
2.1in X 5.2in X 5.7in
(5.4cm X 13.2cm X 14.6cm)
Weight:
1.5 lbs. (0.7 kg)
Water Capacity
400ml
Type of Protection Against Electric Shock:
Class II Type B
Degree of Protection Against water:
IPX1 - Drip Proof
Heater Settings
1 to 4
CPAP.com always offers these services:
8 am to 10 pm CST Toll Free Phone and Email Support
24 hour access to our CPAPtalk.com Support Forum
Learning Center for information on sleep apnea and cpap equipment
Consumer Purchasing Trends Reports
Product Evaluation Results from our Product Challenges
Warranty Services for all items purchased through CPAP.com
Insurance Compliant Invoices
Free Prescription Request System
Important Tips
Two versions of the HC150 are available: the 110 volt version HC150 and the 230V version HC150AEU. The 230V version has a power cord but requires that a plug be attached.
Manufacturers do not test their Auto Adjusting Machines on the HC150, however it will work with most APAPs. APAPs which use the volume pressure of the tube to determine ideal pressure should function properly.
For GoodKnight 420S and 420E CPAP machines, please use the Sensor Line Kit for Puritan Bennett Sensor Line Machines when attaching the HC150 Humidifier.
This would not be an ideal heated humidification solution for the Virtuoso LX machine because the technology is not capable of supporting an external humidifier.