This is the hose guide for the Breeze System. It is the part of the headset that fits between the outrigger and the nasal pillow shell and holds the short tube in place over the head. It also has adjustable slots to hold the halo straps in place for more stability. Halo straps are included.
Return On Warranty Issues Only
Specifications
CPAP.com always offers these services:
8 am to 10 pm CST Toll Free Phone and Email Support
24 hour access to our CPAPtalk.com Support Forum
Learning Center for information on sleep apnea and cpap equipment
Consumer Purchasing Trends Reports
Product Evaluation Results from our Product Challenges
Warranty Services for all items purchased through CPAP.com
"Does not fit my current Breeze headgear which I purchased last year. The nose piece does not stay in the track. I was able to modify it with twist ties to keep it in, but disappointed in the lack of compatibility."
Breeze...from hell
Tai D, CA – April 28, 2010
"what a nightmare with the plastic snapping and overall impractical design with small wood screws into plastic where failure was inevitable."
Works great, though prone to breaking
Ronald R, Glenwood, MD – January 14, 2009
"I have used multiple different CPAP masks. So far, the nasal breeze seems to be the best fit for my needs. Unfortunately, the comfort and ease come at a cost---namely, some of the components seem to break after a year or so of use. Fortunately, the parts are available, rather than having to buy the entire mask."
good to get parts
Dan B, Sioux Center, IA – December 10, 2008
"the mask is excellent, but every time I pack it to move somewhere, the front pieces tend to break. Good to be able to get parts. If you're not moving it, mask is excellent."
Breeze Hose Guide
Laurie J. – June 11, 2008
"I have found that the Puritan Bennett Breeze SleepGear is the most comfortable CPAP mask for me. I sleep on my side and the regular masks always leaked air and gave me dry eyes.
The only thing I don't like about the Breeze SleepGear is that the Breeze Hose Guide breaks easily and has to be replaced. Having interchangable parts for 'old' and 'new' versions of the SleepGear is a plus."
CPAP tubing and CPAP hose can be interchangeable terms. CPAP hoses/tubing are used for two main purposes: either to connect the machine or humidifier to the CPAP mask, or to connect the machine to a humidifier.
Machine to Mask Hose. Machine to Mask hoses are the standard hose used with most therapy setups. The hose is placed to the air outtake of either the machine or humidifier and connects to the CPAP mask to deliver the airflow to the mask. There are three types of machine to mask hoses:
Standard/Performance Hose.Standard 6 foot hoses come included with each cpap machine purchase. The posts on all CPAPs, humidifiers and masks are a standard size, so a standard CPAP hoe will fit on all. The standard hoses are also available in 8 foot and 10 foot sizes. There are also lighter hoses available that were designed to be more flexible and put less pull on the CPAP mask.
Hose with Sensor Line. A few auto-titrating CPAPs and Bilevels require a pressure line sensor to detect breathing patters and pressure needs. The machines that require this tubing have been discontinued and are no longer sold.
Heated Hose. A heated CPAP hose contains copper coils embedded in or wrapped around it. These coils conduct a constant temperature through the hose. Heated hoses can only be used with specific machines.
Humidifier Hose. Humidifier hoses connect a CPAP machine to a stand alone humidifier to deliver airflow from the machine to the mask. Humidifier hoses are smaller than standard hoses. They come in either 18 or 24 inches.
Are all CPAP hoses the same?
All CPAPs use basically the same hose, but there may be additions that are necessary to operate certain machines.
A standard CPAP hose is six feet long. The ports on all CPAPs, humidifiers and masks are a standard size and so a standard CPAP hose will fit on all. The best hoses are smooth-bored for less noise.
Many auto-titrating CPAPs and bilevels require a pressure line senor to detect breathing patterns and pressure needs. The sensor may be in the form of an adapter with narrow tubing attached, or narrow tubing threaded inside the six foot hose. In both cases, one end of the narrow tubing is plugged into the machine. Those machines will not operate without the pressure line sensor.
There are certain delivery devices, such as the Comfort Curve, which require a special CPAP hose, too.
What is a heated CPAP hose?
A heated CPAP hose contains copper coils embedded in, or wrapped around, the hose. These coils are gently heated to conduct a constant temperature throughout the length of the hose. This enhances the comfort of the therapy and reduces or eliminates rainout caused by the water compensating as it travels through the hose to the mask.
Heated hoses are more expensive alternatives to cloth tubing insulation, but they prevent rainout in nearly all cases. The Hybernite Rainout Control System is a stand alone option that can be used with any machine to prevent rainout and increase delivered humidification.
Some manufacturers have developed heated hoses to work with specifically with select machines in their product lines. The ClimateLine Tubing is used with S9 and H5i Climate Control System machines.
The PR System One Heated Tube is used with PR System One 60 Series CPAP Machines.
The ThermoSmart Heated Hose is used with Fisher & Paykel 600 Series machines.
What is a hose cover?
A hose cover is placed over the hose in order to insulate the hose and to make the hose more comfortable. The simplest and most cost effective way to insulate a CPAP hose is to wrap it in an insulating fabric. This enables the hose to remain flexible and adds little weight.
Companies such as Snugglehose provide a cost effective tubing insulation available in several colors and styles. Not only will the covers reduce or eliminate rainout, they also provide a more personal and less institutionalized appearance. An example of a Snugglehose is shown below.
What is rainout?
Rainout is the accumulation of water in a CPAP tube due to warm moist air cooling on its way from your CPAP machine to your CPAP mask.
Solutions to rainout include raising the temperature of your bedroom, insulating your tubing with a Snugglehose, or purchasing a CPAP machine with an integrated heated hose.
How do I clean a CPAP hose?
Your CPAP hose will last longer if you detach it every morning and hang it to air dry. It should be removed by grasping it on the rubber ends, rather than on the hose itself. A "Hose Quick Connect" is available to help remove and replace the hose more easily.
Drying the hose each morning will also prevent bacteria from growing in the damp interior and help reduce the possibility of colds and other health issues.
If you are not drying the hose daily, then be sure to replace the hose very frequently as negative health issues will result!
How often should I replace my CPAP hose?
CPAP hoses can last a long time, sometimes up to a year if taken care of properly.
Signs of wear are dry, cracked places on the inside lining or on the rubber ends; "stretch marks" near the rubber ends; and mineral deposits or mold from water left inside the hose.
Your CPAP hose will last longer if you detach it every morning and hang it to air dry. It should be removed by grasping it on the rubber ends, rather than on the hose itself. A "Hose Quick Connect" is available to help remove and replace the hose more easily.
Drying the hose each morning will also prevent bacteria from growing in the damp interior and help reduce the possibility of colds and other health issues.
If you are not drying the hose daily, then be sure to replace the hose very frequently as negative health issues will result!
How do I avoid getting tangled in CPAP hoses?
There are a few ways to keep from getting tangled up in your CPAP tubing. Try running your CPAP hose behind the headboard of your bed. There are also several types of suspension systems we carry here at CPAP.com. You can see the different types of Hose Management Systems under our Comfort & Cleaning section. An example of a hose management system, the CPAP Hose Lift System, is shown below.