Dear Customer: CPAP.com no longer supports Internet Explorer 6 or 7. These browsers have known security flaws and may not display all features of this and other websites. Learn how to update your browser. You can contact us directly at 1-800-356-5221 to place an order or learn more about our products.

    ClimateLine™ Tubing for S9™ and H5i™ Climate Control System

    Product Images

    ClimateLine™ Tubing for S9™ and H5i™ Climate Control System

    The ClimateLine™ Tubing for S9™ and H5i™ Climate Control System is a heated tube for use with the ResMed™ S9 line of machines. It uses a built-in mask temperature sensor to reach relative humidity at the mask. Sensors inside and outside the CPAP machine closely monitor changes in humidity and prevents condensation from forming inside the tube.

    Manufactured by ResMed.

    The ClimateLine™ Tubing for S9™ and H5i™ Climate Control System is a heated tube for use with the ResMed™ S9 line of machines. It uses a built-in mask temperature sensor to reach relative humidity at the mask. Sensors inside and outside the CPAP machine closely monitor changes in humidity and prevents condensation from forming inside the tube.

    Product Features

    The ClimateLine Tubing has an internal heated coil and mask temperature sensor that eliminates rainout in the hose. Climate Control algorithms measure temperatures from the humidifier to prevent condensation from forming. The 15mm diameter ClimateLine Tubing can use the optional SlimLine Tubing Wrap to prevent that "plastic on skin feeling".

    This tubing will ONLY work with the S9 Series CPAP Machines.

    The ClimateLine™ Tubing for S9™ and H5i™ Climate Control System is 78 inches from end to end, including cuffs. The internal diameter of the tube is 15mm.

    The ClimateLine™ Tubing for S9™ and H5i™ Climate Control System is a latex free product.


    Return On Warranty Issues Only

    Specifications

    Product Specifications

    • Hose Length: 78 inches

    • Hose Diameter: 15mm

    • Hose Material: Polyethylene

    • Latex and Silicone Free

    ClimateLine Cleaning Instructions:

    • Disconnect and clean weekly.
    • Wash the tube using warm water and mild detergent.
    • Rinse well.
    • Hang to air dry tube before use.
    • Do not hang in direct sunlight.
    • The tubing can be submerged in water, however, if this occurs it must be completely dried before using.

    CPAP.com always offers these services:

    • 8 am to 10 pm CST Toll Free Phone and Email Support
    • 24 hour access to our CPAPtalk.com Support Forum
    • Learning Center for information on sleep apnea and cpap equipment
    • Consumer Purchasing Trends Reports
    • Warranty Services for all items purchased through CPAP.com
    • Insurance Compliant Invoices
    • Free Prescription Request System

    Manufacturer Note

    • Some product images supplied by ResMed © ResMed 2010 Used with Permission.
    • ResMed products are for sale only to patients within the U.S. and not to other third parties or businesses.
    • All services provided by CPAP.com, including advertisement, ordering, sale, delivery, instruction, and setup of the products are performed solely by CPAP.com and independently of the manufacturer.

    Important Tips

    The ClimateLine comes standard with the S9 Machine bundled with the H5i and ClimateLine Kit.

    • This tubing will ONLY work with the S9 Series CPAP Machines. On any other machine, the SlimLine Tubing will significantly reduce overall pressure at the mask and may produce erratic pressure outputs for Auto CPAP machines.

    • If an O2 Enrichment Adapter is used with the ClimateLine Heated Tubing for the S9 Series of CPAP machines, the O2 Enrichment Adapter must be placed between the ClimateLine tubing and the mask instead of between the S9 Humidifier and the hose, in order for the ClimateLine tubing to work correctly.

    ClimateLine Tubing Information and Use:

    • Tubing Options: ResMed's S9 line of machine have a number of tubing options. The SlimLine 15mm tube is a non-heated tube in a thin, flexible style. The machine can also be used with an OPTIONAL heated ClimateLine Tubing which integrates with the machine and OPTIONAL H5i Heated Humidifier to provide increased humidification and reduced chances of rainout. The ClimateLine is available in two diameters. The SlimLine 15mm ClimateLine Tubing and a standard diameter 19mm ClimateLine Max Tubing. Additionally a standard diameter, non-heated tube may be used.

    • ClimateLine Tubing Lengths: A traditional CPAP tube is 72 inches long. The optional 15mm ClimateLine Tubing length is 78 inches. The optional 19mm ClimateLine MAX Tubing length is 75 inches.

    • Installation of the ClimateLine: The ClimateLine attaches to the back of the machine using the same port as a standard hose. The electronics connection is below the port and may be covered with a protective flexible rubber cap attached the machine. Place the machine so the back of the unit housing the filter and hose connection is facing you. After removing the rubber cap, orient the hose so the electronic tab is facing toward the filter. Push the tubing end firmly onto the port, then rotate the tube clockwise to fit the two electronic connections together.

    • Removing the ClimateLine: To remove the ClimateLine from the back of the machine, rotate the hose counter clockwise. The electronic connections disengage allowing the hose to removed. Cover the machine's electronic port with the flexible rubber cap to protect the connections.

    • Cleaning Instructions for the ClimateLine Heated Tube:

      • Daily:

        • Disconnect the tubing from the machine and mask.
        • Hang in air dry.
        • Do not hang the tubing in direct sunlight.

      • Weekly:

        • Disconnect the tubing from the machine and mask.
        • Wash the tubing with warm water and a mild detergent.
        • Rinse thoroughly with clean running water.
        • Hang and allow to air dry out of direct sunlight.
        • The tubing can be fully immersed in water but MUST BE completely dry before use.

      Hose Diameters

      The original or 'standard' diameter for a hose used with CPAP therapy is 22mm and can be used with the majority of CPAP, Auto Adjusting and BiLevel or BiPAP machines. Some machines require a 15mm tubing referenced as "Thin" or "SlimLine™" and are designed to work ONLY with a 15mm hose. Other machines allow for the selection of either a 22mm or a 15mm hose. Still other machines use ONLY a heated hose specific to that line of devices and cannot use a non-heated hose of any diameter.

      This hose, the ClimateLine™ Tubing for S9™ and H5i™ Climate Control System, is a small (15mm) diameter size, heated hose. It is compatible ONLY with ResMed S9 machines. It is not compatible with any other lines of ResMed machines. It not compatible with devices made by other manufacturers even if they use a heated hose.