ResMed Power Station II (Battery Only)

This is a single, replacement or additional battery for use with the Resmed Power Station Battery Kit for S9 Machines.

The ResMed Power Station (RPS) II has the unique feature of being able to use two batteries to double the run time. Use the Battery Coupler for ResMed Power Station (RSP) II which connects two ResMed Power Station II Batteries in series. The Battery Coupler automatically switches from one battery to the other when needed. The Battery Coupler Kit for ResMed Power Station (RSP) II includes both the Battery Coupler and a Velcro Strap for ResMed Power Station (RPS) II to secure the batteries to one another.

The other components required to use the battery with an S9 Series CPAP or VPAP machine are not included with this product but are available. The Resmed Power Station Battery Kit for S9 Machines has all parts needed to power an S9 machine with a battery.

The equivalent lithium content of a single RPS II batterymeets requirements for safe travel as set by the IATA.

• 9.06" x 4.96" x 1.02" Battery
• Battery Pack alone 2 lbs
• 4 Hr. Full Charging Time
• Battery has a 6 Month Warranty
• Shelf Life of Charge Up To 1 Year
• Battery Life 500 Charging Cycles

Please note: The RPS II has a voltage output selector on the back panel of the unit which can be used to change from 24v to 26 v power. All S9 CPAP and VPAP devices require 24v with and without the use of a humidifier.

1. Select "24v" output on the back panel of the ResMed Power Station
2. Connect the S9 Series DC Cable for ResMed Power Station (RPS) II to the ResMed Power Station
3. Remove the cap from the other end of the S9 Series DC Cable for ResMed Power Station
4. Connect the uncapped end of the S9 Series DC Cable for ResMed Power Station to the S9 machine in the port where the power cord is normally connected to the machine
5. Turn on the ResMed Power Station
6. Turn the S9 Machine on as normal

The Power Supply Unit (PSU) Adapter for ResMed Power Station (RPS) II is NOT used to operate the RPS II. During use, the S9 Series DC Cable for ResMed Power Station (RPS) II connects directly between the RPS II and the S9 machine.

The S9 Series DC Cable for ResMed Power Station (RPS) II is for use ONLY with the ResMed Power Station II and is not compatible with other DC sources.

1. Connect the Power Supply Unit (PSU) Adapter for ResMed Power Station (RPS) II to the ResMed Power Station
2. Connect the External Power 90 Watt Supply for ResMed S9 Series CPAP and BiPAP Machines that comes standard with the S9 machines to the PSU Adapter
3. Plug the S9 Power Supply into an AC wall outlet
4. The "charging" light will show until the battery is fully charged

The Power Supply Unit (PSU) Adapter for ResMed Power Station (RPS) II is required to charge the RPS II. The PSU connects the RPS II to the S9 External Power supply.

The S9 Power Supply Unit that comes standard with all S9 Series machines are used to charge the ResMed Power Station II. The S9 power supply is not included with the battery.

The manufacturer warranty for the ResMed Power Station II is 6 months.

Please contact CPAP.com with questions. Call toll free: 1-800-356-5221 or email to cpap@cpap.com.