h5i chamber top updated product cpapdotcom

Product Images

  • h5i chamber top updated product cpapdotcom
  • Standard Water Chamber for H5i™ Heated Humidifier -Top - Updated Product
  • S9 Machine with H5i Humidifier
  • OLD VERSION - H5i Standard Water Chamber
 

Standard Water Chamber for H5i™ Heated Humidifier

Manufactured by ResMed.

Item #36802-36803:

In Stock

Available to Ship: Today

Have a question? Call us!

1-800-356-5221(Mon-Fri 8AM-10PM CST, Sat 8AM-6PM CST)

Important Tips

The H5i Water Chamber holds 380 ml of water.

The plate in the Standard Water Chamber for H5i™ Heated Humidifier is made of aluminum.

Maximum Fill Level Tips

  • Do not fill the water tank above the maximum fill line. Damage to the humidifier or therapy device may occur. If the water tank is overfilled, water may leak out of the tank inlet (located on the front corner of the tank) when installing the tank lid.
  • Use only room temperature distilled water in the tank. Do not put any chemicals or additives into the water. Possible airway irritation or damage to the water tank may result.
  • Remove the tank, empty all water, and replace the empty tank before transporting the humidifier base.
  • Do not attempt to fill the water tank while it is inside the humidifier.
  • To avoid spilling, do not disconnect the humidifier from the therapy device with water in the tank. Remove the water tank from the humidifier before disconnecting the therapy device.
  • Do not turn the humidifier on without the water tank installed. The Humidifier number setting must remain on 0 if there is no water in the water tank.
  • The humidifier door must be set in the open position before removing the water tank. Do not remove the water tank without making sure that the humidifier door locks into the open position.
  • Do not move the humidifier while the water tank has water in it.

Manufacturer Warranty

This product comes with a 90 Day Manufacturer Warranty. CPAP.com will work with the manufacturer on your behalf if the product needs repairs. Please follow these steps:

  • Contact us at cpap@cpap.com or 1-800-356-5221 to receive an RMA (Return Merchandise Authorization) Number before returning the equipment
  • Include a note with the product describing the issue you are experiencing, along with your full contact information to include a return shipping address and the RMA number provided to you
  • Ship only the defective items to CPAP.com at 10101 Stafford Centre Drive, Stafford, TX 77477
  • Do not return accessory items such as the carry bag, hose or power cords
  • Loaner Humidifiers are available for rental during the warranty process
  • Email updates will be sent to keep you informed as the product moves through the warranty process
  • CPAP.com will contact the manufacturer on your behalf and handle all shipping between us and the manufacturer
  • The repaired or replaced unit will be returned to you. Shipping charges may apply.

Please note: The manufacturer warranty is voided by water damage or misuse of the machine.