Sign up for our newsletter to receive CPAP tips and special offers!

    ResMed Zippered Tubing Wrap

    ResMed Zippered Tubing Wrap - RolledResMed Zippered Tubing Wrap - Coiled - UprightResMed Tubing Wrap Flaps - Shown with Hose (Not Included)
    Product Images
    • ResMed Zippered Tubing Wrap - Rolled
    • ResMed Zippered Tubing Wrap - Coiled - Upright
    • ResMed Tubing Wrap Flaps - Shown with Hose (Not Included)

    ResMed Zippered Tubing Wrap

    Zippered Tubing Wrap by ResMed is a durable combination of nylon and polyester designed to insulate a CPAP hose and help prevent rainout. The Zippered Tubing Wrap is made to fit any standard 6 foot hose or thinner hoses such as the SlimLine™. Just unzip the wrap, place the hose inside and zip it back up, that is it!

    Manufactured by ResMed.

    Zippered Tubing Wrap by ResMed is a durable combination of nylon and polyester designed to insulate a CPAP hose and help prevent rainout. The Zippered Tubing Wrap is made to fit any standard 6 foot hose or thinner hoses such as the SlimLine™. Just unzip the wrap, place the hose inside and zip it back up, that is it!

    Product Features

    The Zippered Tubing Wrap from ResMed is intended to provide comfort while helping to eliminate the build-up of condensation in the hose. The wrap is compatible with both standard and SlimLine™ hoses.

    Pleasant Aesthetics

    ResMed's Tubing Wrap has a unique hidden zipper sewn into the side of the wrap using the same royal blue color. This design creates a clean look for the wrap which is intended to be more pleasing to the eye than a non-covered hose.

    Durable Materials

    Nylon, polyester, and velcro are used to produce the ResMed Tubing Wrap. These materials allow for a manageable and pliable product, while providing durability and strength. The thickness of the fabric exterior protects the hose as it rests inside the wrap.

    Compatible with Most Hoses

    The long, two meter Tubing Wrap from ResMed can accommodate both 19mm inner diameter hoses as well as 15mm inner diameter hoses. Also, the wrap is 78 inches long and will cover a 72 inch or 6 foot standard and slim hose. To make the wrap the right proportion for a 6 foot hose, fold the excess material backward, leaving the rubber end exposed. Use the exposed rubber end to connect the hose to the CPAP machine. Refer to the last image on this product page for further details.

    To find a wrap specifically designed for 15mm hoses, visit the ResMed Tubing Wrap for AirSense™ 10, AirCurve™ 10, and S9 Series SlimLine™ Tubing product page.

    This product is the tubing wrap only. It does not include the hose.


    Return On Warranty Issues Only

    Specifications

    This Product Includes...

    • 1 - Zippered Tubing Wrap

    Product Specifications

    Weight (without a hose): 3.008 oz

    Length: 6 ft 6 in (2m)

    Materials:

    • Nylon
    • Polyester
    • Velcro

    This product is Latex-free.

    CPAP.com always offers these services:

    • 8 am to 10 pm CST Toll Free Phone and Email Support
    • 24 hour access to our CPAPtalk.com Support Forum
    • Learning Center for information on sleep apnea and cpap equipment
    • Consumer Purchasing Trends Reports
    • Warranty Services for all items purchased through CPAP.com
    • Insurance Compliant Invoices
    • Free Prescription Request System

    Manufacturer Note

    • Some product images supplied by ResMed © ResMed 2010 Used with Permission.
    • ResMed products are for sale only to patients within the U.S. and not to other third parties or businesses.
    • All services provided by CPAP.com, including advertisement, ordering, sale, delivery, instruction, and setup of the products are performed solely by CPAP.com and independently of the manufacturer.

    Important Tips

    Cleansing Tips

    Please Note: Hand wash the tubing wrap in warm water and use mild shampoo or soap to clean the material. Rinse the wrap completely and set it out to air dry away from direct sunlight. When the wrap is new, do not wash the product with anything else, as the color may bleed.

    • Do not use bleach or harsh chemicals.
    • Do not machine wash.

    Compatibility Tips

    The Zippered Tubing Wrap from ResMed is not designed to fit the 4 foot long, 8 foot long, or 10 foot long hoses.

    The manufacturer indicates this tubing wrap is designed for use with the following hoses:

    The wrap will hold all standard and slim six foot hoses. If the wrap is longer than the hose, fold the surplus material backward to create a small flap of fabric.

    Positioning Tips for 78 Inch Long Hoses

    • Open the tubing wrap entirely, so the inside material is visible.
    • Place the hose inside the tubing wrap.
    • Use the zipper to begin enclosing the material over the rubber end of the hose.
    • Secure the velcro strap at the base of the zipper.
    • Cover the length of the hose as it tapers to a close near the rubber cuff.

    Positioning Tips for Six Foot Hoses

    • Open the tubing wrap entirely, so the inside material is visible.
    • Place the hose inside the tubing wrap.
    • Use the zipper to begin enclosing the material over the rubber end of the hose.
    • Secure the velcro strap at the base of the zipper.
    • Per the manufacturer, fold the surplus material at the other end over the back of the hose. Please refer to the last image on this page for details.
    • Use the end with the surplus material to connect the hose to the machine.