Respironics Battery Kit with 400 Watt DC to AC Power Inverter

Product Features

Specifications

This Product Includes...

• Respironics Lead Acid Battery
• Manual
• Battery Travel Bag
• Battery Charger with AC Cord
• 400 Watt DC to AC Power Inverter
• 12 Volt Cord with Cigarette Adapter
• DC Battery Adapter with Clips

Product Specifications

• 8 am to 10 pm CST Toll Free Phone and Email Support
• 24 hour access to our CPAPtalk.com Support Forum
• Learning Center for information on sleep apnea and cpap equipment
• Consumer Purchasing Trends Reports
• Product Evaluation Results from our Product Challenges
• Warranty Services for all items purchased through CPAP.com
• Insurance Compliant Invoices
• Free Prescription Request System

• We are only authorized to sell and ship Philips Respironics products to end-users residing in the United States.
• Philips Respironics recommends that new patients purchase their devices, masks and initial accessories from a homecare company that can provide an individualized patient equipment set-up, clinical and after-sales support, and a program to assist patients with therapy success.
• The "Full Support MSRP" of this product is 0.00
• The "Limited Support MSRP" of this product is 0.00

Important Tips

CPAP Learning Center

Frequently Asked Questions (FAQs)

Will my CPAP operate on DC / battery power?

All CPAPs will operate on DC power with the use of an inverter to change the current from DC to AC before it reaches the machine. However, many will operate on DC power without the need for an inverter, just a power cord that plugs into the CPAP and ends in a cigarette lighter plug.

Inverters do require a lot of power. If you need to use an inverter to run your machine on battery power, the inverter will probably take about half the life off the battery.

To determine if your CPAP will operate without an inverter, look for a DC outlet on the machine, either at the back or on the side, with a single opening directly in the center. It should be labeled "DC Power" or similar term. You can also review our Compare Charts to see if your machine has a optional DC cable option.

How do I use a battery to operate my CPAP?

First you need to determine if your machine is configured to operate on DC power and has a DC power outlet. If your machine does have a DC power outlet and you want to run your marine battery, then you will need the correct DC cable for your machine and an adapter cable that fits over the cigarette lighter plug and ends in alligator clips.

CPAP.com sells complete battery kits with everything you need for your machine including the right cables for your machine and the battery. You can find the right battery kit for your machine here.

If your machine does not have a DC power outlet, then you will also need an inverter to be able to run your machine on battery power.

If you have questions about the specific power needs of your machine, review the "Power" tab on your machine's product page, or give us a call at 1-800-356-5221.

How do I prepare for power outages with CPAP?

There are a lot of back up battery choices out there that can give you peace of mind in case of a power outage. Some machines offer the option of an integrated battery which will automatically fail over to battery power if the power goes out.

CPAP.com sells battery packs to accompany your machine if an integrated battery is not available. Visit CPAPtalk for more advice specific to your needs, or view this past thread on the topic here.

Will my CPAP operate overseas?

An adapter may be required to plug a US power cord into a wall outlet in a foreign country. CPAP.com sells an assortment pack of World Traveler Power Adapter Plugs, which allow CPAP machines to plug into different types of wall sockets found in different countries.

All the models CPAP.com sell contain power converters that enable the machine to operate on any AC current from 100 to 240 volts without any adjustment. Check with your dealer or manufacturer to see if your machine needs an external converter that lowers the voltage from 240 to 120 VAC.

What type of power does my CPAP need?

Most CPAP and BiLevel machines today are designed to operate on both AC and DC battery currents. In the United States, the AC current from wall outlets is 110 volt and most batteries produce 12 volt DC current. Overseas, the AC current is usually 220 or 240 volt.

We include information about the power needs and capacities in the description of our products. Please see the "Power" tab on any machine product page for this information. You can also see a summary of the voltage range and whether it is DC capable on our Compare Charts.

What type of battery should I use?

For longer battery use, we suggest a deep-cycle marine battery. A CPAP set at 10cm will usually run for about three nights before having to recharge a deep cycle marine battery. A car battery will usually run a machine for 8 hours and still start the car.

There are small, portable battery packs that will operate a CPAP set at 10cm for at least one night, or about eight hours. CPAP.com sells full battery kits that come with everything needed to run your machine off battery power including the right cables needed for your machine and a battery. You can find the battery kit for your machine here. On each battery kit page, you can input your machine and pressure setting to see an estimate battery life for your machine.