respironics comfortgel blue nasal cpap mask cushion angle

Product Images

  • respironics comfortgel blue nasal cpap mask cushion angle
  • respironics comfortgel blue nasal cpap mask cushion sst flap bottom
  • respironics comfortgel blue nasal cpap mask size location

ComfortGel Blue Cushion for ComfortGel Nasal CPAP Masks

The gel-filled cushion conforms around the nose and uses the SST flap to create a consistent seal all night. The gel technology allows for a greater variety in facial features such as facial hair.

Manufactured by Philips Respironics.

Select Size to View Stock Levels

Have a question? Call us!

1-800-356-5221(Mon-Fri 8AM-10PM CST, Sat 8AM-6PM CST)

Important Tips

DO NOT BOIL CUSHION. 'Blue' Gel Technology is engineered to conform to facial features without the need to boil the cushion. Unlike the Original ComfortGel Nasal CPAP mask, the ComfortGel Blue cushion cannot be boiled. If you have any problems with size or fitting, please call our toll free number 800-356-5221 for assistance from a CPAP expert or select the Original Gel Cushion for ComfortGel and ComfortGel Blue Nasal CPAP Masks.

Replacing Mask Frames and Cushion with SST Flap

ComfortGel and ComfortGel Blue mask frames and cushions are interchangeable, but the cushion and frame must be the same size. ComfortGel Blue Cushion for ComfortGel Nasal CPAP Masks will work with either mask.

  • Large frame = Large cushion and flap
  • Small/Medium frame = Medium cushion and flap
  • Small/Medium frame = Small cushion and flap
  • Petite frame = Petite cushion and flap

The same size silicone flap must be used to secure the gel cushion to the frame.

Where do I find the size?

The ComfortGel cushion size is printed on the bottom, underneath the cushion body. The ComfortGel cushion flap is also labeled and the size and Resistance Control number is printed on the base side of the flap.

System One Resistance Control

Resistance Control is a numbering system on all new Respironics CPAP masks and based on variable resistance characteristics. Each number instructs the device to compensate for different mask types. The result is a consistent and reliable pressure, enhanced with all the benefits of Flex Technology, no matter which mask is used.

You can find the Resistance Control number next to the size indicator on the SST FLap. The size of the frame, cushion, or flap is printed or embossed on each individual part. An example of the size indicator is a printed "L" meaning the replacement part is a size "Large." Use the number next to the Size for use with your PR System One CPAP Machine. The ComfortGel Original SST Flap DOES NOT come with the Resistance Control number printed on the SST Flap.

Help with Sizing

For help with deciding your size, download and print and cutout the ComfortGel Printable Sizing Gauge for this mask. For help with changing out the ComfortGel cushions or fitting directions, please review: ComfortGel Mask Instructions.