Fisher & Paykel Evora Nasal CPAP Mask with Headgear

CapFit Design: Minimal Headgear With AirEdges to Reduce Red Marks

With only a few extra parts, the CapFit design helps create the same seal you'd get from your regular mask without the extra tugging from your headgear. To help improve your comfort and reduce red marks, the Evora uses soft stitching around the edges of the straps.

Nasal Cushion Adapts to Your Unique Face Shape for an Improved Seal

The Evora uses an innovative soft and compact floating seal that's designed to leverage the tension created by the mask's backstrap to surround your nose in a soft nasal cradle. The two-part design hugs your nose, giving you a leak-free and unobtrusive seal.

Whisper Quiet: Circular Exhalation Port Reduces Blowing Air and Noise 

The Evora is a quiet mask engineered for comfort. The exhalation port vents air out and away in a circular pattern while reducing noise to only 25 decibels, which is considered whisper quiet. 

What's Included

• Mask Cushion in Selected Size (Small, Medium, Large, or Wide)
• Mask Frame
• Mask Headgear
• Top Strap
• Back Strap
• Exhaust Holes
• Tube 
• Swivel

Cleaning Instructions

1. Remove the mask cushion from the Frame and rinse with lukewarm water and mild soap.
2. Gently scrub the cushion and make sure to remove any debris.
3. Set aside to air dry.

How to Assemble the Evora Nasal CPAP Mask:

1. Push the Swivel onto the bottom of the Tube. 
2. Push the cushion firmly onto the Frame to click into place.
3. Push the headgear down onto the Frame behind the Exhaust Holes to click into place.

Evora Nasal CPAP Mask Fitting Guide:

1. Connect the Top Strap button to the middle position. 
2. Hold the front of the mask and pull the Backstrap over the back of the head. Pull the mask down to position the cushion under your nose. 
3. Adjust the Backstrap to tighten or loosen the cushion against your face by pulling evenly on the tabs. 
4. Adjust the Top Strap button to tighten or loosen the headgear, so that it is sitting just above your ear without touching it. You may need to take the mask off to do this. The Top Strap should sit just forward of the middle of your head. 
5. Connect the Swivel to the CPAP hose, and with the CPAP on, readjust the Backstrap until the mask seals, and the cushion feels comfortable under your nose.