Sound + Sleep SE Premium Sound Machine

• Electrical Input Range: 110V – 220V, 2.5 amps
• Operating Temperatures: 0 - 50°C
• Satisfaction Guarantee: 30 Days

WARNINGS

• Be careful to avoid dropping objects or spilling liquids onto the unit. If liquid is spilled on the unit, unplug and turn it upside down immediately. Allow it to dry thoroughly (one week) before plugging it into a wall outlet again. Following these instructions does not ensure that the unit will be operational.


• Do not reach for the unit if it has fallen into water. Unplug it immediately at the wall outlet, and if at all possible, drain the water before retrieving the unit.

How to Set Up

To connect to an AC outlet:

1. Push the power adapter plug at the end of the cable into the machine jack.
2. Slip the cord under the rubber foot by separating the two pieces of the foot along the slit. The machine should sit flat on a table or nightstand if the cord is installed correctly.
3. Next, connect the AC plug into a wall outlet. The first time you plug it in, it may take up to 30 seconds to perform a self-test.

Please note that the sixteen painted dots around the dial do not light up.

Avoid placing your Sound + Sleep Machine:

• Near water, such as a bathtub, swimming pool, faucet, or basin to avoid electrocution.
• Be sure to place it away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
• In areas that are exposed to direct sunlight or close to heat-radiating products such as electric heaters. Do not place unit on top of stereo equipment that radiates heat.
• In areas that are dusty, humid, moist, lack ventilation, or are subject to constant vibration.

How to Clean the Sound + Sleep Machine SE

The unit should be cleaned regularly with a soft, dry cloth. The grill may be vacuumed to remove excessive dust or particle build-up. Do not use any liquids, sprays (including solvents, chemicals, and alcohol), or abrasives to clean.