ResMed AirFit™ F40 Full Face CPAP Mask with Headgear

ResMed AirFit F40 Features and Benefits:

• Seal and Comfort Achieved by 100% of Patients
• Ultra-Compact Design for Minimal Facial Contact
• Magnetic Clips Simplify Putting On and Taking Off
• AdaptiSeal Cushion Adapts to Your Face
• Flexible Frame Sits Softly on Your Face
• Short Tube Provides Flexibility To Sleep in Any Position

The AirFit F40 Full Face Mask is Ideal For:

• Light Sleepers
• Active Sleepers
• Side & Back Sleepers
• If You Wear Glasses
• If You Are Claustrophobic 
• If You Watch T.V. or Read Before Bed
• If You Breathe Through Your Mouth or Nose

Seal and Comfort Achieved by 100% of Patients

In a ResMed external clinical study, the AirFit F40 achieved seal and comfort for 100% of patients surveyed, ensuring a snug fit without compromising comfort.

Ultra-Compact Design for Minimal Facial Contact

The AirFit F40 offers minimal facial contact and maximized comfort thanks to the under-the-nose cradle fit, which reduces bulk, limits feelings of claustrophobia, and keeps an open line-of-sight for your bedtime wind-down.

Magnetic Clips Simplify Putting On and Taking Off

The magnetic clips allow for quick and easy fitting or removal of the mask, reducing hassle before bedtime and upon waking. A redesigned quick-release elbow also makes it easier than ever to quickly disconnect for middle-of-the-night bathroom trips.

AdaptiSeal Cushion Adapts to Your Face

The AdaptiSeal silicone cushion adapts to your facial contours, providing comfort and maintaining an effective seal throughout the night.

Flexible Frame Sits Softly on Your Face

The fully flexible frame, covered by soft nylon fabric padding, sits below the eyes for comfort and reduced facial marks. It allows for easier movement during sleep without compromising the seal.

Short Tube Provides Flexibility To Sleep in Any Position

The short tube reduces drag and moves with you, providing the flexibility to sleep comfortably in any position and ensuring continuous therapy.

What’s Included:

• AirFit F40 Mask Frame
• AirFit F40 Cushion
• AirFit F40 Headgear
• AirFit F40 QuietAir Vent Ring
• AirFit F40 Quick-Release Elbow/Short Tube
• User Manual

Compatibility:

Full Compatibility List

Mask Type: Full Face

Headgear / Frame Sizes:

• Standard

Headgear Included: Yes

Replaceable Cushion: Yes

Cushion Type: Silicone

Good For:

• Active Sleepers
• Back Sleepers
• Claustrophobia
• Facial Hair
• Mouth Breathing
• Nose Breathing
• Readers / TV Watchers
• Side Sleepers
• Stopping Leaks
• Wearing Glasses

Sleep Position:

• Any

Breathing Preference: Combo

Open Line Of Sight: Yes

Product Warnings:

The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the User Guide for complete information, including magnet contraindications and warnings.

Disassembling Your Mask for Cleaning

1. Undo the fastening tabs on the upper headgear straps and pull from the frame.
   1. Tip: Keep the magnetic clips attached to the lower headgear straps to easily distinguish the upper and lower straps when reassembling.
2. Squeeze the side buttons on the elbow and detach from the vent ring.
3. Pull the cushion stud out of the frame stud hole, repeat on the other side.
4. Pull the vent ring from the cushion.

If there is any visible deterioration of a mask component (cracking, crazing, tears etc.) the component should be discarded and replaced.

Daily/After each use: Cushion, elbow and short tube, vent ring

Weekly: Headgear, frame

Cleaning Your Mask

1. Soak the components in warm water with a mild liquid detergent. Ensure that there are no air bubbles while soaking.
2. Shake the components vigorously in the water and hand wash with a soft bristle brush. Pay particular attention to the vent holes in the QuietAir/Multi-hole vent ring.
3. Thoroughly rinse the components under running water.
4. Squeeze the fabric components to remove excess water.
5. Leave the components to air dry out of direct sunlight. If the mask components are not visibly clean, repeat the cleaning steps. Make sure that the vents and anti-asphyxia valves are clean and clear.

Sizing Guide