The ResMed S8 Elite II is equipped with Easy-Breathe Technology along with new software, The CPAP now has a quieter motor and an improved EPR (Expiratory Pressure Relief) mode. The Easy-Breathe Technology is a new level in comfort and quietness. Use Version 3.5 or greater ResScan Software to check therapy effectiveness, compliance data, and periodic trends.

• Users can choose a fixed CPAP pressure or an EPR mode 1 to 3 for maximum comfort with control. Adjusting the EPR settings allows the Easy-Breathe Technology to drop the pressure upon exhalation so that breathing feels more "natural". A pressure Ramp is also available and provides for a slow and comfortable increase to your pressure setting.

• The S8 Elite II offers an improved motor that outputs only 24 decibels at 10cmH20 measured at one meter away. The S8 Generation One motors average 30 Decibels, making the new motors 75% quieter.

• Fully customizable, the S8 Elite II has reminders for accessory replacements like your mask or machine filters. Take advantage of the remote downloading capabilities with the ResScan Data Card which provides comprehensive efficacy and usage data that helps you monitor critical trends on a breath-by-breath basis. The S8 Elite II allows for complete tracking and easy monitoring of patient therapy and compliance.

• Compact and robust, the design of the S8 Series is portable and user-friendly, including Auto Altitude Adjustment to make sure the correct pressure is delivered when you travel.

• The unit comes with a built-In power supply which automatically detects the DC input, which is ideal for travel. Please purchase the DC-12 Converter For S8 Machines.

• Also included are the Ramp and settling options that enhance comfort and help improve compliance.

• Pressure 4 to 20 cm H2O
• Ramp Time 0 to 45 min. (5-min. increments)
• Starting Ramp Pressure 4 to CPAP; user adjustable
• Dimensions 4.4” x 6.5” X 5.7” (112mm x 164mm x 145mm)
• Weight 3 lbs
• Filters Pollen
• Device Set-Up LCD/Keypad
• Data Storage Capacity Display: 365 days summary data and 5 nights detailed data (up to 500 events per session). Data Card: 180 days of summary data and 5 nights detailed data (up to 200 events per session)
• Electrical Requirements 100 – 240 V, 50/60 Hz; 110 V, 400 Hz; 2.5A <140 VA (110W)(maximum power consumption). Instantaneous peak power consumption <340VA
• Operating Altitude Sea level to 8500’ (2591 m)
• Humidification Optional Integrated Heated Humidifier or Pass-over Humidifier
• DC Power Only use DC-12 Converter by ResMed for DC input or damage may occur.
• Warranty 2 Year Manufacturer

A ResMed DC-12 Converter For S8 Machines must be used with the 12 volt jack. Any other cable will likely cause a machine failure. You can find this item on our site.

Do not run this machine on a regular AC to DC inverter. A pure sine wave inverter must be used. We sell these on the website.

All S8 and S8 II CPAP Machines utilize a "Cool Down" feature that runs the CPAP Motor up to 1 hour after turning the machine off. The motor helps to cool off the humidifier plate. You may hear a "faint blowing sound" when you turn the machine off. However, you can unplug the power cord and allow the heater plate to cool without airflow.

SmartStart enables your device to start automatically by breathing into the mask. Leak alert indicates when a high mask leak is present.

If you have enabled Leak Alert, the SmartStart feature automatically becomes disabled. You cannot have both features enabled.

The S8 AutoSet II and Elite II are compatible with this product, but the CPAP machines were manufactured BEFORE the H4i was manufactured. When setting either machine, please note that H3i will appear on the display.