"VERIFIED CPAP.COM CUSTOMEROn road/camping trip now. I can get 2 nights without a charge. Charging is simple and with the invertor I don't have to worry about a dead battery. Thanks"
September 21, 2015
Manufactured by Battery Power Solutions.
The 150W Modified Sine Wave Inverter for C-100 & Freedom CPAP Battery Packs converts DC power to AC power. It adds to the flexibility of the C-100 Travel Battery Pack and the Freedom Travel Battery Pack by allowing the battery to be charged from a DC source.
- Updated Design
- Converts DC to AC
- Provides Power for AC Only Devices
- Can Charge the C-100 from DC
- USB Charging Port
Updated DesignThe sine wave inverter for the C-100 & Freedom travel battery packs has been updated to feature 2 USB ports and a 3 prong AC power outlet. The shape of the inverter has been redesigned to achieve the height and width needed for a 3 prong outlet. The taller, yet thinner unit houses an exposed outlet for easy accessibility. Any 2 prong or 3 prong connection can be used with this unit.
Converts DC to AC
The inverter can be used to power a device which requires AC power by plugging the device's power cord into the inverter. Convert the power by locating the 3 prong outlet found at the end of the inverter.
Provides Power for AC Only Devices
The inverter can be plugged into the C-100 battery or the Freedom battery with the included DC cord and the DC input cord included in the C-100 & Freedom Battery Packs. Once connected, the device can be plugged into the inverter's AC outlet which will then power the device.
This inverter, in combination with either the C-100 or the Freedom Battery, will provide a battery option for machines that require AC power:
- XT Fit CPAP Machine
- XT Auto CPAP Machine
- ICON Premo CPAP Machine with Built-In Heated Humidifier and ThermoSmart Heated Hose
- ICON Auto CPAP Machine with Built-In Heated Humidifier and ThermoSmart Heated Hose
- SleepStyle 234 CPAP Machine with Built In Heated Humidifier
- Zzz-PAP 'Silent Traveler' CPAP Machine 2 Prong Version Only
- Zzz-PAP Auto CPAP Machine with Therapy Software 2 Prong Version Only
Please note that the use of an inverter with a battery will reduce the run time by nearly half. Please verify the wattage requirements of the device being plugged in as some require higher than 150W.
Can Charge the C-100 Battery & the Freedom Battery from DC
The inverter can be plugged into a DC source using the included DC cable. Then, the C-100 & Freedom Battery Pack Charger is plugged into the inverter, then the charger connected to the battery, providing power to the battery.
USB Charging Port
The inverter also features two USB ports which are intended to charge other devices that use a standard USB cable when the inverter is connected to a DC source.
Compatibility with AirSense and AirCurve 10 Machines
Although the 150W inverter will provide an AC power outlet to plug the AirSense or AirCurve 10 power supply in to, it will provide a very low run time in this configuration. It is NOT RECOMMENDED to use the inverter to power these machines. Instead use the AirSense and AirCurve 10 24V Power Converter for C-100 Battery.
Return On Warranty Issues Only
This Product Includes...
- 150W Inverter
- DC Cable
Dimensions - Inverter Only: 5.25 in x 2.75 in x 0.5 in
Weight - Inverter Only: 0.5 lbs
Output Rated Power: 120W (Continuous) - 150W (Maximum)
DC Cable Length - Not Including Connectors: 27.5 in
CPAP.com always offers these services:
- 8 am to 8 pm CST Toll Free Phone and Email Support
- 24 hour access to our CPAPtalk.com Support Forum
- Learning Center for information on sleep apnea and cpap equipment
- Consumer Purchasing Trends Reports
- Warranty Services for all items purchased through CPAP.com
- Insurance Compliant Invoices
- Free Prescription Request System
Battery Run Time With Inverter: Please note, use of an inverter with a battery will significantly reduce available run time. The inverter itself draws power from the battery, along with the device being used.
Use With ResMed S7 and S8 Machines: When used with the C-100 Battery, this 150 Watt inverter is suitable to power a S7 or S8 series machine without humidifier.