Fisher and Paykel HC224 Water Column CPAP Manometer with HC325 Chamber

Works Perfectly. Shows the exact pressure the CPAP is set at. Its the Gold standard at measuring gas and vapor.

Works As expected, thanks

As some other reviewers have said, a lot of money for two pieces of plastic and a rubber stopper, but it is a quick and easy way to check your pressure. If you have a low pressure, you might have to fiddle with it some (my pressure is 12 which was easy to see).

Bargain for those who are seeking an accurate and durable manometer. Hands down more reliable than any electrical or mechanical manometer that I've come across.

I was concerned about the accuracy of my relatively new CPAP machine. I selected this manometer, because it should last a lifetime. The assembly was quick and easy. The CPAP machine being tested was very accurate. I am pleased with this purchase and highly recommend it. Thanks CPAP.com for the quick shipment. The manometer has relieved my concerns and restored peace of mind.

If you want to be able to verify or confirm your actual pressure readings on your CPAP or APAP machine, buy this. I have used mine many many times to see what my APAP pressure really was on my starting pressure of ten. Very very useful and very very simple to use.

Works perfectly and easily. It verifies that the cpap machine is flowing the correct amt of air. The cpap may not be adjustable by the user, but the manometer can show you that the air flow is adequate. You can select a higher level of air flow. My new manometer showed that my setting of "15" was not quite there. So, I adjusted my cpap to "15.5" and now, according to the manometer, I have my "15". Without the manometer, I would have no way of knowing what a true "15" was. This is good "peace of mind".

This is such a simple product I was surprised to find so many minor flaws. First the manual is not written for universal use. It's written for use with a HC200 whatever that is. Fortunately it's so simple that a manual isn't really needed. Next the rubber coupler that holds the measuring column to the chamber actually blocks the view of several of the readings. Of course the pressure level I'm prescribed is completely blocked from view. Major hassle. Lastly the overall quality is just average (think of a thin cheap plastic measuring cup with crude lettering). The markings are very vague and I suspect will wear off easily if you aren't careful. Regardless it will give you accurate readings just don't think that because you are paying a premium that you are buying a high quality product. Of note is that my machine was off by .3 cm H2o. Given that the offset (used to correct differences between actual pressure and front panel readings) was still set to Zero I highly suspect that my provider (not CPAP.COM) didn't double check the reading with a manometer before shipping.

Easy to setup and cannot be inaccurate (unless someone changes gravity) Would like a Y tubing arrangement so that a mask can be used while measuring. When pressure is different between inspiration and expiration it would be nice to measure both rather than just static pressure.

This is a good investment if you have any doubts your machine may be not performing as spec'd. This unit should last forever since there are no electronics or moving parts to break. As long as the laws of physics remain in effect this unit will work.

Easy to set up and use to prove settings on CPAP are correct. They were spot on, so not sure really needed. Hoped it would also serve as a humidifier since don't have power when camping, but virtually no change in water level over night, so don't think that adds much.

This device is a good idea for all CPAP users. The purchase went quite smoothly, thanks for a pleasant experience.