The REMstar Auto M Series with A-Flex represents an amazing new chapter in pressure therapy. Not only does it make each breath more comfortable at inhalation and exhalation, the REMstar Auto also adjusts overall therapy to accommodate the patients therapy needs due to changes in lifestyle or progression of disease state.

A-Flex is delivered by our clinically proven auto algorithm that maintains effective therapy at minimal pressures making this combination even better for patients.

A-Flex is a comfort feature built on top of the REMstar Auto algorithm. If breathing events occur, the auto algorithm raises the A-Flex pressure profile to eliminate those events, while simultaneously making sure that pressure never rises to a level thats unnecessarily or uncomfortably high.

Universal Power

The M Series Auto operates automatically between 100 - 240v AC. When traveling either inside or outside the USA, there are no switches to switch or fuses to change. The machine will automatically sense what voltage is needed and set itself to run on the power needed.

The user will need to adapt the plug that goes into the wall to fit the style of outlet socket that is being used. This is simply done with a Power Adapter Plug kit. This is the same type of plug adapter that would be used with a hair dryer or an electric shaver.

World Traveler Power Adapter Plugs.

DC Power (Cigarette Lighter Adapter)

The M Series Auto comes equipped with a DC plug on the back of the unit. This allows the user to connect the CPAP to an external DC battery source.

Using a Respironics, 12volt DC Power Cord the Remstar Auto M Series can be powered by plugging into a cigarette lighter plug. This is ideal for traveling by car, boat, or recreational vehicle that is equipped with a cigarette lighter plug.

Respironics, 12volt DC Battery Adapter Cable

DC Power (Marine Deep Cycle Battery)

It is recommended that you use a 100 amp hour, 12v DC deep cycle marine battery for operating you CPAP machine when not connected to 110v AC /230v AC.

There are two cables needed to configure the M Series Auto with a Marine Deep Cycle Battery. They fit together to make a connection from the back of the M Series Remstar Auto to the battery clip terminals on the marine battery.

Here are the links to the cables needed to hook up to a marine style battery. Both cables are needed.

Respironics, 12volt DC Power Cord (to connect CPAP to cigarette lighter socket)

Respironics, 12volt DC Battery Adapter Cable (to connect to battery terminals)

Respironics Battery Pack

The Respironics Battery Pack has been a long standing favorite of our customer’s. It weighs in at 13lbs and can be carried easily with its shoulder strap.

This battery pack will give roughly 26 hours of use, depending on the cpap pressure setting. (Results may vary.)

Respironics Battery Pack

* The Respironics Battery Pack must be charged with shore power. This unit can be charged at voltages ranging from 115v – 230v.

The optional M Series Heated Humidifier is not included with this listing but can be purchased separately.

Respironics EncoreViewer Software along with their Smart Card Reader will allow you to track the clinical data recorded on the Smart Card.