- CPAP Masks
Nasal
Best for those who breathe through the nose only or use a chinstrap.
Full Face
For those that need or prefer delivery to the mouth and nose.
Nasal Pillow
Lightweight and minimal masks that seal at each nostril.
Other Masks
Nasal prong, hybrid, oral, and total face masks.
All Masks
Having problems with mask fit? Shop all our masks for the best fit.
Mask Parts
Keep your CPAP mask in top shape and extend its life by replacing parts regularly.
Mask Kits
Need to replace more than one piece? Mask Kits include everything except headgear.
- CPAP Machines
CPAP Machine
Provide therapy air at one specified pressure continuously.
Auto Adjusting CPAP
Automatically adjust pressure throughout the night for a more comfortable experience.
BiLevels & BiPAP®
Provide one pressure for inhalation and a separate pressure for exhalation.
Travel Sized Machine
Smaller machines designed to be taken during travel.
All Machines
View all types and models of machines on one page.
- CPAP Supplies
Comfort & Cleaning
Accessories to keep your therapy equipment clean and comfortable.
CPAP Mask Parts
Keep your CPAP mask in top shape and extend its life by replacing parts regularly.
CPAP Filters
The cleaner your filters, the cleaner the air you breathe.
CPAP Hoses (Tubing)
We offer a variety of hose types and lengths to enhance your setup.
Power Solutions
Batteries, inverters, converters, power cords, and parts.
CPAP Humidifiers
Humidifiers provide moisture to help prevent dryness of the nose and throat.
CPAP Humidifier Parts
Replacement items for a wide range of humidifiers.
CPAP Machine Parts
We have a huge selection of machine parts for almost every machine.
CPAP Software
Various supplies to review advanced therapy data.
More Solutions
Various products such as oxygen and EPAP solutions.
- Sleep Accessories
Bedding
Shop our comfortable, stylish, and therapeutic blankets and pillows.
Sleep Masks
Increase your sleeping time with one of our healing and luxurious sleep masks.
Snoring Aids
Quiet the nighttime roar with our selection of snoring aids.
White Noise Sound Machines
Browse our top-of-the-line white noise machines to help you fall and stay asleep.
Health Monitors
Improve your night by tracking your sleep quality, health, and fitness.
- Starter Pack
On Your Next $150+ Purchase!
Subscribe Today- Home /
- CPAP Supplies /
- CPAP Hoses (Tubing) /
- Short Tubes /
- Generic
24 inch Humidifier Hose with Rubber Ends
Sorry, this item is no longer available.
Product Overview
The 24 inch Humidifier Hose with Rubber Ends is the same quality item that comes as standard with virtually all stand-alone heated or passover humidifiers. It will work with most of the available models. The extra length of the 24 inch hose is useful with the Fisher & Paykel heated humidifiers.
All CPAP.com brand hoses are smooth bore designed. This means there are no ridges inside the hose for air pressure to resist against. The hose is supported by a molded plastic frame is located on the outside of the hose. This design provides consistent pressure delivery and ensures a quieter performing hose.
This Product Includes...
- Length = Approximately 24 Inches
- Diameter = 22mm
- Weight = Approximately 2 Ounces
- Latex Free
CPAP.com always offers these services
- 24 hour access to our CPAPtalk.com Support Forum
- Learning Center for information on sleep apnea and cpap equipment
- Consumer Purchasing Trends Reports
- Warranty Services for all items purchased through CPAP.com
- Insurance Compliant Invoices
- Free Prescription Request System
The 24 inch Humidifier Hose with Rubber Ends hose does not work with the LX "Oasis" passover humidifier by Respironics. That humidifier required a special hose that is no longer manufactured by Respironics.
This product DOES NOT contain latex rubber.
Machine to Mask Hose. A hose is connected to the air outlet of either the machine or humidifier and it connects to the CPAP mask to deliver the airflow to the mask. In the past, the hose used to connect a machine to mask was a standard size. Today, there are a number of different hose options. There are three types of machine to mask hoses:
- Standard / Performance Hose: A long hose or tube is included with each CPAP / BiLevel machine purchase. The connections on all CPAPs, humidifiers and masks are a standard size, so a standard CPAP hose will fit on all. Standard hoses are also available in 8 foot and 10 foot sizes. There are lighter hoses available that were designed to be more flexible and put less pull on the CPAP mask.
- Heated Hose: A heated CPAP hose contains copper coils embedded in or wrapped around the length of the hose. These coils conduct a constant temperature through the hose. The majority of heated hoses are specific to the machine.
- Hose with Sensor Line: A few auto-titrating CPAPs and Bilevels require a pressure line sensor fitted into the hose to detect breathing patterns and pressure needs but the majority of those machines are no longer in production. (Machines which use the tubing pictured below have been discontinued by the manufacturer.)
Humidifier Hose. Humidifier hoses connect a CPAP or BiLevel machine to a stand alone humidifier. Humidifier hoses are shorter than standard hoses. They come in either 18 or 24 inch lengths.
Historically, a standard CPAP hose is six feet long, has an internal diameter of 19mm and a connector cuff with an internal diameter of 22mm. Today some hoses are 6 feet long, others are 4 foot long, 8 foot long and 10 foot long. Some hoses have an internal diameter of 19mm (standard) and others have an internal diameter of 15mm (thin or slim style). To use a slim 15mm hose, the machine must have a menu option setting to accept the narrower diameter of a 15mm hose and still deliver the prescribed pressure to the mask to ensure effective therapy.
All hoses have a 22mm connection cuff and fit on all CPAP masks. The connection ports on all CPAP, APAP and BiLevel machines, humidifiers, and masks are a standard size, so a standard CPAP hose will fit on all. Some of the very small machines use a hose adapter between the machine and the 22mm cuff of the hose.
Some manufacturers offer a heated hose option designed to work only with their machines. To read more about heated hoses see the "What is a heated CPAP hose?" article included in this FAQ section.
A few auto-titrating CPAPs and BiLevels require a pressure line sensor to detect breathing patterns and pressure needs. The sensor may be in the form of an adapter with narrow tubing attached or the narrow tubing is threaded inside the six foot hose. In both cases, one end of the narrow tubing is plugged into the machine. Those machines will not operate without the pressure line sensor.
A heated CPAP hose contains copper coils embedded in, or wrapped around, the hose. These coils are gently heated to conduct a constant temperature throughout the length of the hose. This enhances the comfort of the therapy and reduces or eliminates rainout caused by the water condensing as it travels through the hose to the mask.
Heated hoses are more expensive alternatives to cloth tubing insulation, but they prevent rainout in nearly all cases. The Hybernite Rainout Control System is a stand alone option that can be used with any machine to prevent rainout and increase delivered humidification.
Some manufacturers have developed heated hoses to work specifically with select machines in their product lines. The ClimateLineAir™ Heated Tube for AirSense™ 10 and AirCurve™ 10 Machines is an example of a heated hose used by the AirSense™ 10 and AirCurve™ 10 Machines.
Here are some heated hoses we carry:
ClimateLine™ Tubing for S9™ and H5i™ Climate Control System
Companies such as Snugglehose provide a cost effective tubing insulation available in several colors and styles. Not only will the covers reduce or eliminate rainout, they also provide a more personal and less institutionalized appearance. An example of a Snugglehose is shown below.
Here are some hose covers we carry:
Tubing Wrap for AirSense™ 10, AirCurve™ 10, and S9 Series SlimLine™ Tubing
Respironics Insulated Hose Cover
ResMed Zippered Tubing Wrap
+ See More
Solutions to rainout include raising the temperature of your bedroom, insulating your tubing with a Snugglehose, or purchasing a CPAP machine with an integrated heated hose.
Your CPAP hose will last longer if it is detached every morning and hung to air dry.
Drying the hose each morning will also prevent bacteria from growing in the damp interior and help reduce the possibility of colds and other health issues. Remember, what is in the hose goes into the airway.
If you are not drying the hose daily, then be sure to replace the hose very frequently as negative health issues will result!
Hose care tips:
- Remove the hose by gripping the end or cuff, not the hose itself
- Hang the hose to dry after each use
- Wash hose weekly to avoid residue and maintain health
- Protect the hose from curious pets
Hose care tools:
- A Hose Quick Connect helps the tube to easily disconnect from the humidifier
- Purdoux Mask and Hose Soap is specially formulated mild soap designed to clean a CPAP hose and mask.
- The Tube Cleaning System is a tube care kit to rinse, soak and dry the hose.
- The CPAP Tube Brush Second Gen is used to scrub the inside of a tube. It is available for both slim line and standard diameter hoses.
- The Republic of Sleep Hose Cover wraps the length of the tube in soft fleece material. Although its intention is to help reduce rainout (water collecting in the tube) many CPAP users report it deters pets from using the hose as a chew toy.
- + See More
Signs of wear include dry, cracked places on the inside lining or on the rubber ends; "stretch marks" near the rubber ends; mineral deposits or mold from water left inside the hose; or a visible puncture or tear in the material.
There are a few ways to keep from getting tangled up in your CPAP tubing. Try running your CPAP hose behind the headboard of your bed. Also, there are several types of suspension systems we carry here at CPAP.com. You can see the different types of Hose Management Systems under our Comfort & Cleaning section. One example is the HoseBuddy Tangle Free CPAP Hose Suspension System:
Here are some items we recommend that may help with hose comfort:
CPAP Hose Lift
HoseBuddy
Tube Management Clip
+ See More
Good quality hose that gives that little extra space to roll over while sleeping with out pulling on the machine. Great value. more...
Exactly as hoped for, and quick delivery also.
A very professional and caring organization who do not leave 'anything' to chance. Their products are v. good value for money. Freight a little expensive BUT WORTH IT. more...
Gives that xtra length sometimes desired
works well
People also viewed:
Assistance & Resources
About Us
CPAP.com is a family owned and operated business dedicated to providing Sleep Apnea equipment to those who need sleep therapy.
Contact Us
Phone: 1-800-356-5221
Fax: 1-866-353-2727
Email: cpap@cpap.com
Address: 13235 N Promenade Blvd, Stafford, TX 77477
Site Map User Agreement Privacy Policy PHI Policy About Ads Medicare Notice CCPA Notice Returns Policy
While you may find the information provided on this site helpful, please understand that it is not in any way intended to replace the advice of a physician or medical professional. If you're concerned about your health or worried about specific symptoms, please consult a doctor. If you have additional questions about our site, please consult our User Agreement for more information.
