9 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends
9 Foot 19mm CPAP Hose 22mm Rubber Ends Overview
The 9 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends is a longer version of the standard hose packaged with many CPAP and BiLevel machines. The non-heated hose measures 19mm in interior diameter with a 22mm diameter rubber cuff. The width of the rubber connection allows the hose to attach to any machine compatible with a standard hose.
This hose is designed to increase range of motion for the user. The 9 foot hose offers 108 inches of freedom during sleep therapy. The longer hose does not vary in quality. Those who sleep toward the middle of the bed or have a larger distance from the bed to the machine may benefit from the additional length.
Please Note: This hose is NOT compatible with a machine that requires a 15mm hose referred to as "thin" or "slim". In order to ensure compatibility, the machine MUST have the option to select the setting based on the diameter of the hose. The diameter of the hose will directly impact the delivery of prescribed pressure during sleep therapy, so the machine needs to accommodate the proper diameter of the hose.
Like all CPAP.com brand hoses, the hose is smooth on the inside due to the smooth bore design. The construction of the hose is intended to provide consistent pressure delivery and to ensure a quieter performing hose. The molded plastic frame is located on the outside of the hose for support.
The 9 Foot 19 mm Diameter CPAP Hose with 22mm Rubber Ends is latex free.
This Product Includes...
- 9 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends
This product DOES NOT contain latex rubber.
- Length: 9 ft (108 in)
- Diameter: 19mm
- Rubber End Diameter: 22mm
- Weight: 4.77 ounces
- Latex Free
CPAP.com always offers these services
- 24 hour access to our CPAPtalk.com Support Forum
- Learning Center for information on sleep apnea and cpap equipment
- Consumer Purchasing Trends Reports
- Warranty Services for all items purchased through CPAP.com
- Insurance Compliant Invoices
- Free Prescription Request System
The original or 'standard' diameter for a CPAP therapy hose is 22mm and can be used with the majority of CPAP, Auto Adjusting and BiLevel or BiPAP machines. Some machines require a 15mm tubing referenced as "Thin" or "SlimLine™" and are designed to work ONLY with a 15mm hose. Other machines allow for the selection of either a 22mm or a 15mm hose. Still other machines use ONLY a heated hose specific to that line of devices and cannot use a non-heated hose of any diameter.
This 9 foot CPAP hose with rubber ends is a standard diameter size, non-heated hose. It is compatible with machines that can use a 22mm hose. It is not appropriate for use with a machine that can use only a 15mm hose or only a heated hose.
This hose is NOT compatible with the following machines:
- AirMini™ AutoSet Travel CPAP Machine
- Puritan Bennett GoodKnight 420S and 420E CPAPs
- GoodKnight 425 or KnightStar 330 bilevels.
All of these machines have hoses with built-in pressure sensor tubes. This hose does not have that feature.
This product DOES NOT contain Latex rubber.
very good product
I really like length of the hose, I can roll or turn over without any problems.
Love the extra length for moving around.
I've been using a 10' hose in our RV, but it somehow got a few holes in it. The shorter 9 foot hose is just right. Thanks for adding this length to your offerings. more...