Respironics 6ft 19mm Tubing

Philips Respironics
cpap.com is an authorized seller of all Philips Respironics products

Respironics 6ft 19mm Tubing

Regular price $8.25
Regular price $39.99 Sale price $8.25
79% Off
Sale Out of Stock
Shipping calculated at checkout.
Type

Please select a Type

Qty 1
1
2
3
4
  • Ships same day if ordered before 4 PM CST

  • Free shipping on orders over $99

  • checkmark icon

    100% price match guarantee

  • FSA/HSA eligible

  • Compatible with nearly all CPAP, APAP, BiPAP and BiLevel systems for every manufacturer on the market, Respironics' new Pure White Performance 19mm Diameter Tubing with 22mm Ends is 20% lighter and much more flexible than standard tubing. Performance Tubing is 20% lighter and many times more flexible than standard tubing. It works well with smaller lightweight masks, as it is less likely to pull on the mask and disrupt the seal. The ergonomically designed cuff is easier to grasp and remove from the mask or machine. With a standard 6-foot length, cuff diameter and wall thickness, Performance Tubing can be easily substituted for standard tubing. It's not just for Respironics CPAP/BiPAP systems. Performance Tubing will work with all ResMed S6, S7, S8 and VPAP systems as well as many systems from DeVilbiss, Fisher & Paykel, Puritan Bennett and others. Performance Tubing is pure white in color. No more boring, drab and dreary gray for your CPAP tube. Consider this low cost alternative: White 6 Foot Performance 19mm Tubing with 22mm Easy Grip Cuffs . General Tips Section Hose Diameters The original or 'standard' diameter for a hose used with CPAP therapy is 22mm and can be used with the majority of CPAP, Auto Adjusting and BiLevel or BiPAP machines. Some machines require a 15mm tubing referenced as "Thin" or "SlimLine™" and are designed to work ONLY with a 15mm hose. Other machines allow for the selection of either a 22mm or a 15mm hose. Still other machines use ONLY a heated hose specific to that line of devices and cannot use a non-heated hose of any diameter. This hose, the Respironics Pure White 6 Foot Performance CPAP/BiPAP 19mm Diameter Tubing with 22mm Ends, is a standard diameter size, non-heated hose. It is compatible with machines that can use a 22mm hose. It is not compatible with a machine that can use only a 15mm hose or only a heated hose. Other Notes All Respironics hoses are smooth bore designed. Smooth bores have no ridges inside the hose for air pressure to resist against. The supportive wire frame is located on the outside of the hose. This design provides consistent pressure delivery and ensures a quieter performing hose. The Respironics Performance 19mm Diameter Hose with 22mm Ends does not have a pressure sensor line, which allows you to connect certain CPAP/BiPAP machines that measures pressure in the mask. Please select the 6 Foot CPAP Hose for Puritan Bennett 420E, 420S, 425 and Knightstar 330 if you need a universal 6 foot hose with a pressure line. 1032907
    SKUHS-SD-PRP-PERF-TP-19
    Info Icon Product Info icons This product is coming soon. Mar. 13
    Product image for Respironics Pure White 6 Foot Performance CPAP/BiPAP 19mm Diameter Tubing with 22mm Ends

    Respironics Pure White 6 Foot Performance CPAP/BiPAP 19mm Diameter Tubing with 22mm Ends

    Regular price $8.25
    Regular price $39.99 Sale price $8.25
    Sale Out of Stock
    Added to Cart ()
    We Also Recommend

    Details

    More

    Compatible with nearly all CPAP, APAP, BiPAP and BiLevel systems for every manufacturer on the market, Respironics' new Pure White Performance 19mm Diameter Tubing with 22mm Ends is 20% lighter and much more flexible than standard tubing.

    • Performance Tubing is 20% lighter and many times more flexible than standard tubing. It works well with smaller lightweight masks, as it is less likely to pull on the mask and disrupt the seal.
    • The ergonomically designed cuff is easier to grasp and remove from the mask or machine.
    • With a standard 6-foot length, cuff diameter and wall thickness, Performance Tubing can be easily substituted for standard tubing.
    • It's not just for Respironics CPAP/BiPAP systems. Performance Tubing will work with all ResMed S6, S7, S8 and VPAP systems as well as many systems from DeVilbiss, Fisher & Paykel, Puritan Bennett and others.
    • Performance Tubing is pure white in color. No more boring, drab and dreary gray for your CPAP tube.

    Consider this low cost alternative: White 6 Foot Performance 19mm Tubing with 22mm Easy Grip Cuffs .

    General Tips Section

    Hose Diameters

    The original or 'standard' diameter for a hose used with CPAP therapy is 22mm and can be used with the majority of CPAP, Auto Adjusting and BiLevel or BiPAP machines. Some machines require a 15mm tubing referenced as "Thin" or "SlimLine™" and are designed to work ONLY with a 15mm hose. Other machines allow for the selection of either a 22mm or a 15mm hose. Still other machines use ONLY a heated hose specific to that line of devices and cannot use a non-heated hose of any diameter.

    This hose, the Respironics Pure White 6 Foot Performance CPAP/BiPAP 19mm Diameter Tubing with 22mm Ends, is a standard diameter size, non-heated hose. It is compatible with machines that can use a 22mm hose. It is not compatible with a machine that can use only a 15mm hose or only a heated hose.

    Other Notes

    All Respironics hoses are smooth bore designed. Smooth bores have no ridges inside the hose for air pressure to resist against. The supportive wire frame is located on the outside of the hose. This design provides consistent pressure delivery and ensures a quieter performing hose.

    The Respironics Performance 19mm Diameter Hose with 22mm Ends does not have a pressure sensor line, which allows you to connect certain CPAP/BiPAP machines that measures pressure in the mask. Please select the 6 Foot CPAP Hose for Puritan Bennett 420E, 420S, 425 and Knightstar 330 if you need a universal 6 foot hose with a pressure line.

    1032907

    Specs

    More

    FAQs

    More

    What is CPAP tubing / CPAP hose?

    CPAP tubing and CPAP hose are interchangeable terms. CPAP hoses / tubing are used for two main purposes: to connect a CPAP or BiLevel machine or a humidifier to a mask, or to connect the machine to a humidifier. Machine to Mask Hose. A hose is connected to the air outlet of either the machine or humidifier and it connects to the CPAP mask to deliver the airflow to the mask. In the past, the hose used to connect a machine to mask was a standard size. Today, there are a number of different hose options. There are three types of machine to mask hoses:

    • Standard / Performance Hose:A long hose or tube is included with each CPAP / BiLevel machine purchase. The connections on all CPAPs, humidifiers and masks are a standard size, so a standard CPAP hose will fit on all. Standard hoses are also available in 8 foot and 10 foot sizes. There are lighter hoses available that were designed to be more flexible and put less pull on the CPAP mask.
    • Heated Hose: A heated CPAP hose contains copper coils embedded in or wrapped around the length of the hose. These coils conduct a constant temperature through the hose. The majority of heated hoses are specific to the machine.
    • Hose with Sensor Line: A few auto-titrating CPAPs and Bilevels require a pressure line sensor fitted into the hose to detect breathing patterns and pressure needs but the majority of those machines are no longer in production. (Machines which use the tubing pictured below have been discontinued by the manufacturer.)

    Humidifier Hose.

    Humidifier hoses connect a CPAP or BiLevel machine to a stand alone humidifier. Humidifier hoses are shorter than standard hoses. They come in either

    18

    or

    24

    inch lengths.

    Are all CPAP hoses the same?

    In years gone by, the answer to this question would have been "yes", but today not all hoses are the same and some machines use different hose types. All CPAP hoses / tubings serve the same function: directing the air stream from the machine to the mask. Historically, a standard CPAP hose is six feet long, has an internal diameter of 19mm and a connector cuff with an internal diameter of 22mm. Today some hoses are 6 feet long, others are 4 foot long, 8 foot long and 10 foot long. Some hoses have an internal diameter of 19mm (standard) and others have an internal diameter of 15mm (thin or slim style). To use a slim 15mm hose, the machine must have a menu option setting to accept the narrower diameter of a 15mm hose and still deliver the prescribed pressure to the mask to ensure effective therapy. All hoses have a 22mm connection cuff and fit on all CPAP masks. The connection ports on all CPAP, APAP and BiLevel machines, humidifiers, and masks are a standard size, so a standard CPAP hose will fit on all. Some of the very small machines use a hose adapter between the machine and the 22mm cuff of the hose. Some manufacturers offer a heated hose option designed to work only with their machines. To read more about heated hoses see the "What is a heated CPAP hose?" article included in this FAQ section. A few auto-titrating CPAPs and BiLevels require a pressure line sensor to detect breathing patterns and pressure needs. The sensor may be in the form of an adapter with narrow tubing attached or the narrow tubing is threaded inside the six foot hose. In both cases, one end of the narrow tubing is plugged into the machine. Those machines will not operate without the pressure line sensor.

    What is a heated CPAP hose?

    A heated CPAP hose contains copper coils embedded in, or wrapped around, the hose. These coils are gently heated to conduct a constant temperature throughout the length of the hose. This enhances the comfort of the therapy and reduces or eliminates rainout caused by the water condensing as it travels through the hose to the mask.

    Heated hoses are more expensive alternatives to cloth tubing insulation, but they prevent rainout in nearly all cases. The Hybernite Rainout Control System is a stand alone option that can be used with any machine to prevent rainout and increase delivered humidification.

    Some manufacturers have developed heated hoses to work specifically with select machines in their product lines. The ClimateLineAir™ Heated Tube for AirSense™ 10 and AirCurve™ 10 Machines is an example of a heated hose used by the AirSense™ 10 and AirCurve™ 10 Machines.

    Here are some heated hoses we carry:

    ComfortLine Heated Tubing Kit

    ClimateLine™ Tubing for S9™ and H5i™ Climate Control System

    PR System One Heated Tube for 60 Series Machines

    + See More

    What is a hose cover?

    A hose cover is placed over the hose in order to insulate the hose and to make the hose more comfortable. The simplest and most cost effective way to insulate a CPAP hose is to wrap it in an insulating fabric. This enables the hose to remain flexible and adds little weight. Companies such as Snugglehose provide a cost effective tubing insulation available in several colors and styles. Not only will the covers reduce or eliminate rainout, they also provide a more personal and less institutionalized appearance. An example of a Snugglehose is shown below. Here are some hose covers we carry: Tubing Wrap for AirSense™ 10, AirCurve™ 10, and S9 Series SlimLine™ TubingRespironics Insulated Hose CoverResMed Zippered Tubing Wrap+ See More

    What is rainout?

    Rainout is the accumulation of water in a CPAP tube due to warm moist air cooling on its way from your CPAP machine to your CPAP mask. Solutions to rainout include raising the temperature of your bedroom, insulating your tubing with a Snugglehose, or purchasing a CPAP machine with an integrated heated hose.

    How do I clean a CPAP hose?

    Your CPAP hose will last longer if it is detached every morning and hung to air dry.

    Drying the hose each morning will also prevent bacteria from growing in the damp interior and help reduce the possibility of colds and other health issues. Remember, what is in the hose goes into the airway.

    If you are not drying the hose daily, then be sure to replace the hose very frequently as negative health issues will result!

    Hose care tips:

    • Remove the hose by gripping the end or cuff, not the hose itself
    • Hang the hose to dry after each use
    • Wash hose weekly to avoid residue and maintain health
    • Protect the hose from curious pets

    Hose care tools:

    How often should I replace my CPAP hose?

    CPAP hoses

    can last a long time, sometimes up to a year if taken care of properly. Signs of wear include dry, cracked places on the inside lining or on the rubber ends; "stretch marks" near the rubber ends; mineral deposits or mold from water left inside the hose; or a visible puncture or tear in the material.

    How do I avoid getting tangled in CPAP hoses?

    There are a few ways to keep from getting tangled up in your CPAP tubing. Try running your CPAP hose behind the headboard of your bed. Also, there are several types of suspension systems we carry here at CPAP.com. You can see the different types of Hose Management Systems under our Comfort & Cleaning section. One example is the HoseBuddy Tangle Free CPAP Hose Suspension System:

    Here are some items we recommend that may help with hose comfort: CPAP Hose LiftHoseBuddyTube Management Clip+ See More

    Fast, free shipping on orders over $99

    Get the best price with our 100% Price Protection Guarantee

    Discounted replacements with Subscribe & Save

    Try any CPAP mask for 30 days, risk-free 

    Shop Your Recently Viewed