AirFit F20 Complete Mask + AirMini Mask Setup Pack Bundle

Features Increase Your Comfort and Provide a Secure Fit and Reduced Leak Events

With the mask, hose, and special adapter from your AirMini, the AirFit F20 Complete Mask + AirMini Mask Setup Pack Bundle gives you all the equipment you need to switch to AirMini masks. Using an AirMini mask gives you a variety of benefits, including:

• Open Line of Sight: Enjoy your favorite TV show or thumbing through the stack of magazines on your nightstand with the low–profile design. 
• No Forehead Pad: The AirFit F20 eliminated the need for forehead support, creating fewer touchpoints and enhancing your comfort.
• Magnetic Headgear Clips: These clips offer a secure fit and make applying and removing your mask a breeze.
• Ideal for Side Sleepers: The AirFit F20 offers a leak-proof seal that holds up under pressure and moves with you as you sleep.

Replacement Parts Only Needed Every Six to Twelve Months

To ensure optimal sleep therapy results, it’s recommended to replace your AirMini hose and mask every six to twelve months. With this bundle, you can store the parts you need in your home so you never have to miss a moment of sleep therapy.

What’s Included:

• AirMini Tubing
• AirFit F20 Mask Frame
• AirFit F20 Cushion (S, M, or L) 
• AirFit F20 Headgear
• AirFit F20 Magnetic Clips
• AirFit F20/AirMini Elbow Adapter

1. Detach the magnetic headgear clips from the base of the cushion, if applicable.
2. With the headgear attached to the mask frame, pull the mask over your head with the ResMed label facing outward.
3. Before the mask settles on the face, move the cushion around to ensure it is fitting properly on the bridge of the nose.
4. With the cushion positioned, pull the lower headgear straps toward the mask and connect the clips to the blue magnet. Note: The lower headgear straps need to fall below the ears.
5. Lift and pull the tabs located at the top of the headgear to apply or loosen tension for a secure fit. Re-attach the tab to the headgear.
6. Lastly, adjust the bottom headgear straps in the same manner, if needed.

Where Do I Find the Size?

The frame is one size; therefore, a size indicator is not found on the mask frame.

The cushion size is printed below the round opening on the mask cushion. A printed black circle with a white letter represents the size of the cushion. The letter S represents a Small cushion, M represents a Medium cushion, and L represents a Large cushion.

The components should be washed using warm water with a mild detergent and allowed to dry out of direct sunlight. When washing the headgear and frame, squeeze them to ensure all soapy water has been rinsed out, and also squeeze after rinsing to eliminate excess water before drying. Follow the suggested timeline to ensure your mask is regularly cleaned:

• Daily: Cushion, Elbow, Short Tube
• Weekly: Headgear (with clips), Frame

ResMed has issued the following statement regarding magnetic headgear clips:

"Magnets are used in the lower headgear straps and the frame of the AirFit N20. Ensure the headgear and frame is kept at least 50 mm away from any active medical implant (eg, pacemaker or defibrillator) to avoid possible effects from localized magnetic fields. The magnetic field strength is less than 400 mT."

The hose should be washed weekly in warm water with a mild detergent, rinsed well, and allowed to air dry. The hose should be replaced every six months.