DreamWisp Nasal CPAP Mask With Headgear

Ideal For:

• Active Sleepers
• Side Sleepers
• Stomach Sleepers
• If You Breathe Through Your Nose
• If You Wear Glasses
• If You Watch T.V. or Read Before Bed
• If You Are New to CPAP

Top-of-Head Hose Connection Reduces Bulk and Improves Seal Stability

Because the hose connects at the crown of the head, the mask offers an open line of sight—which lets you watch T.V. or send work emails for the week ahead—and a more reliable seal.

Included Features Hold Your Selected Fit and Welcome Movement

The hose connection includes a 360° swivel that lets you move freely throughout the night, and the headgear includes magnetic clips that make applying and removing the mask easy.

Especially Made for Stomach Sleepers and Side Sleepers

The design of the DreamWisp lets you sleep in any sleeping position—even on your stomach—without impacting the quality of the seal.

Hollow Frame Reacts Accordingly During Airflow Event

The DreamWisp features a hollow frame that can redirect air to an open tube if the other side becomes closed off while you are sleeping, which can sometimes occur for side sleepers.

Minimalist Design Simplifies Cleaning and Maintenance Needs

Users will enjoy that there’s less equipment to clean and care for since the DreamWisp only consists of a few pieces, plus the cushion and frame are dishwasher safe for extra–simple maintenance.

Choose Your Best Fit with Five Different Cushion Sizes

Cushions are available in Petite, Small, Medium, Large, and Extra Large to ensure a near-perfect fit. With the right–sized cushion, you experience improved flexibility and a better seal.

Two Exhalation Ports Limit Therapy Sounds

What’s Included:

• Cushion (S, M, L)
• Headgear (M)
• Frame Faceplate
• Frame Connector (M)
• Magnetic Headgear Clips
• Fabric Wraps
• Sizing Guide
• Instructions Guide

Compatibility:

This mask is compatible with every CPAP machine except for the AirMini. The nasal cushion is not compatible with the original Wisp mask.

Mask Type: Nasal

Headgear / Frame Sizes:

• Small
• Medium
• Large

Suggested Replacement Schedule:

The nasal cushion should be replaced once every three to six months.

Cleaning Instructions: Yes

Headgear Included: Yes

Replaceable Cushion: Yes

Cushion Type: Silicone

Good For:

• Active Sleepers
• Claustrophobia
• Readers / TV Watchers

Sleep Position:

• Back
• Side
• Stomach

Breathing Preference: Nose

Product Warnings:

WARNINGS

• Manufacturer Magnet Safety Notice: Magnets with a magnetic field strength of 400 mT are used in the mask. With the exception of the devices identified in the contraindication, ensure that the mask is kept at least 6 inches (approx. 15 cm) away from any other medical implants or medical devices that can be impacted by the magnetic fields to avoid possible effects from localized magnetic fields. This includes household members, caregivers, and bed partners that may be in close vicinity to patients that use the masks. See more details from the manufacturer here.
• Do not use the DreamWisp during a procedure using magnetic resonance technology, such as an MRI or CT scan.
• Discontinue use and contact your doctor if any of the following occur: chest discomfort, shortness of breath, severe headache, eye pain or eye infections. Also contact your doctor if you experience skin redness, irritation, discomfort, blurred vision, or drying of the eyes.
• Do not overtighten headgear straps. Doing so can increase the occurrence of red marks and impressions on the skin. Loosening the straps will alleviate these symptoms.
• As with any mask, at low CPAP therapy pressures, some rebreathing may occur.

The nasal cushion should be replaced once every three to six months.

DreamWisp Fitting Tips

1. Select the cushion that fits the width of the nose without blocking the nostrils. The top of the cushion may sit between the bridge and the tip of the nose. There are five cushion sizes available: petite, small, medium, large, extra-large.
2. Unclasp one or both of the magnetic clips from the magnetic clip receiver.
3. Place the cushion over the nose.
4. Clasp the magnetic clips to the magnetic clips receivers.
5. To adjust the headgear, peel the bottom headgear tabs away from the fabric. Evenly adjust the length of the straps. Press the tabs back against the fabric to reattach. Repeat this step with the top straps.
6. Position the mask until it fits comfortably. When finished, the elbow should rest at the top of the head. The cushion should rest comfortably on the face without blocking the nostrils.

How to Check for Leaks with the DreamWisp

It's normal for air to escape from the DreamWisp, especially near the exhalation ports of the mask. You'll notice two: one near the cushion and one on top of the mask near the elbow.

If the blowing air is uncomfortable or gets blown into the face or eyes, this is a sign of a leak. Most leaks can be corrected by repositioning the cushion and tightening the straps.

If the straps pinch or feel too tight, it may be time to choose a larger or smaller sized cushion.