Brevida™ Nasal Pillow CPAP Mask with Headgear - Fit Pack

Ideal For:

• Active Sleepers
• If You Breathe Through Your Nose
• If You Watch T.V. or Read Before Bed
• If You Are New to CPAP

AirPillow Nasal Pillow Cushion Offers Added Stability

Most nasal pillow masks seal inside the nostrils only, but the Brevida features a triangular-shaped cushion that extends from the tip of your nose to your upper lip to form a seal in and around your nose. Added stability comes from the inflatable AirPillow nasal cushion, which pushes the cushion closer to the nose at inhalation and relaxes to allow ease of breath at exhalation.

Fit Pack Lets You Try Different Cushion Sizes at Home

Designed to accommodate a wide range of facial structures, the Brevida includes two cushion options: a size that offers an X–small to Small fit and one that provides a Medium to Large fit. Multiple options in the Fit Pack help you determine an accurate fit, and one of each cushion size is included in your purchase.

Increase or Decrease Headgear Strap Tension for Ideal Fit

The headgear fits over your head and above your ears, allowing both straps to rest gently on the back of your head. Adjustments can be made to your headgear by increasing or decreasing the tension on the headgear strap.

VisiBlue Technology Makes Using Your Headgear Even Easier

The mask features VisiBlue technology that makes it easy to see how the mask should be worn. To improve visibility to various connection points, the headgear, short tube, and swivel are outfitted with a blue hue to guide users where to attach certain parts.

Unique Design Invites Increased Movement

Active sleepers can comfortably change sleep positions throughout the night, thanks to the space between the short tube and swivel and the nasal pillow cushion’s opening.

Ability to Wash Key Parts Adds Longevity to Your Equipment

Between the mask frame and short tube sits the diffuser cap with a filter, which quiets the sound of air as it’s released from the mask. As the filter captures fine particles and becomes dirty, the unit’s functionality may decrease, so even a weekly cleaning can prolong the equipment’s life.

What’s Included:

• Mask Frame
• Cushions (1 XS/S, 1 M/L)
• Headgear
• Headgear Clips
• Diffuser Cap
• Elbow
• Short Tube with Swivel

Compatibility:

This mask is compatible with every CPAP machine except for the AirMini.

Mask Type: Nasal Pillow

Headgear / Frame Sizes:

• One Size Fits Most

Suggested Replacement Schedule:

The silicone nasal pillows should be replaced once every three to six months.

Cleaning Instructions: Yes

Headgear Included: Yes

Replaceable Cushion: Yes

Cushion Type: Silicone

Includes Multiple Cushion Sizes: Yes

Good For:

• Active Sleepers
• Claustrophobia
• Readers / TV Watchers

Sleep Position:

• Back
• Side

Breathing Preference: Nose

Product Warnings:

WARNING: At low CPAP therapy pressures, some rebreathing may occur.

The silicone nasal pillows should be replaced once every three to six months.

Tips to Assemble and Disassemble the Brevida™ Nasal Pillow Mask

Assembly Tips

1. Gently push the nasal pillow cushion into the opening in the middle of the mask frame.
2. Thread the headgear straps through the headgear clips and close the the hook and loop tab to the headgear for closure.
3. Attach the headgear clips to the mask frame.
4. Snap the diffuser cap onto the top of the mask elbow.
5. Connect the blue rim of the swivel to the short tube, then connect the short tube to the mask elbow.
6. Pair one end of the CPAP hose to the swivel and the other end to the CPAP machine.

Obtaining the Best Fit With the Brevida™

1. Once you've removed the Brevida from its packaging and all components are fit together, use your thumbs and index fingers to pull the wings of the cushion slightly apart from one another.
2. Insert the pillows inside the nostrils and position the mask until you obtain a secure fit.
3. Allow the cushion material to enclose the nose to complete the seal around the nose.
4. Using one hand, hold the frame and cushion closely to the face and pull the headgear over the head so both headgear straps land softly at the back of the head.
5. Fit the headgear along the face ensuring the material is above the ears and below the eyes.
6. Lift the hook and loop tabs on the other side of the headgear clips and begin pulling the straps through the clips to increase or decrease tension.
7. Once the best fit is obtained, secure the hook and loop tabs to the headgear.