HumidX™ Plus for AirMini™ Travel CPAP Machine (6 Pack)

HumidX Plus waterless humidifiers allow for portable humidification with your ResMed AirMini CPAP Machine by using a moisture exchanger to repurpose your own breath's condensation as humidification. The HumidX Plus for AirMini is designed for dry environments and climates where heat is high and humidity levels are very low.

HumidX Plus for AirMini is compatible with the AirFit N20 and the AirFit P10 masks for the AirMini travel machine, and each HumidX cartridge will last approximately 30 days. This pack will last around six months.

Please Note: The AirFit F20, AirTouch F20, and the AirFit F30 will not work with the HumidX.

What’s Included:

• Six Pack of Cartridges

Humidification Tips: HumidX™ versus HumidX™ Plus

It is recommended to start with HumidX™ when first adding humidification to the device. If the moisture level is not sufficient due to the dry climate, use the HumidX™ Plus unit to increase moisture levels.

Cleaning Tips

Check daily for signs of damage or blockage. Replace the unit 30 days after the HumidX™ Plus package is opened. DO NOT wash the HumidX™ Plus.

Tips to Assemble and Disassemble HumidX™ Units

• Assembly: To assemble the HumidX™ device, gently pull apart the bulbous connection point on the CPAP tube. With the blue base pointed downward, secure the unit on the end of the connection. Then, connect the short tube pieces together and lock into place.
• Disassembly: To disassemble the HumidX™ device, twist and disconnect the bulbous connection on the hose. Remove the HumidX™ after 30 days and replace with a fresh unit.