ResMed AirTouch™ F20 Full Face CPAP Mask with Headgear

AirTouch F20 CPAP Mask Features and Benefits:

• Memory Foam Cushion
• Open Light of Sight
• Quick-Release Elbow and Magnetic Headgear Clips
• Comfortable Plush Headgear
• QuietAir Vent Reduces Noise to Only 21 Decibels

The ResMed AirTouch F20 is Ideal For:

• Light Sleepers
• Those Who Have Sensitive Skin
• Those Who Breathe From Their Nose and Mouth

Say Goodnight to Silicone: Memory Foam Cushion Layer for a Secure and Comfortable Seal

The AirTouch F20 mask is ResMed's softest mask to date! Instead of a traditional silicone cushion, this ResMed mask uses an UltraSoft memory foam cushion to create a highly comfortable CPAP therapy experience. The memory foam provides a better fit and seal than silicone while giving you a soft, breathable, and comfortable feel at any therapy pressure. While ResMed reports that "UltraSoft memory foam doesn't require cleaning when replaced regularly," we'd still recommend a daily wipe-down, even if following the 30-day replacement schedule.

Under-the-Eye Frame for an Open Light of Sight

The memory foam padding of the AirTouch F20 face mask reduces pressure on the bridge of your nose and doesn't leave behind a facial marking for an overall more comfortable sleep apnea therapy experience. Providing stability, the under-the-eye frame and absence of forehead support allows you to watch television or read a book before bed.

Quick Release Elbow and Magnetic Clips Make It Easy to Put On and Take Off

If you need to get up frequently at night, the AirTouch F20 is designed with a Quick Release Elbow to disconnect you from your CPAP machine without needing to remove your mask. Simply press the tabs and pull the elbow off of your mask when you need to, then click it back in place once you are ready to resume therapy. To easily remove and put on your mask, the magnetic clips lock into place on the frame for quick mask placement.

Plush Headgear for Comfort and Stability

To get a comfortable sleep, the AirTouch F20 headgear and mask frame are plush and created to give you the comfort and stability you deserve.

QuietAir Vent Reduces Noise to Only 21 Decibels

The QuietAir Vent is developed with exhalation diffuser technology within the AirTouch F20 mask elbow to make for a soft and gentle sound. To lightly disperse air, the F20 mask has small multidirectional openings to quiet the night to only 21 decibels, which is softer than a whisper.

What's Included:

• Mask in Selected Size
• Headgear

Compatibility:

The AirTouch F20 is cross-compatible with the AirFit F20 Full Face Mask. The AirFit version can fit the AirTouch memory foam cushion and vice versa.

Mask Type: Full Face

Headgear / Frame Sizes:

• One Size Fits Most

Suggested Replacement Schedule:

The AirTouch F20's memory foam cushion is designed to last only one month before needing replacement.

Cleaning Instructions: Yes

Headgear Included: Yes

Replaceable Cushion: Yes

Cushion Type: Memory Foam

Good For:

• Mouth Breathing

Sleep Position:

• Back
• Side

Breathing Preference: Combo

Product Warnings:

WARNINGS

• The cushion must not be submerged in liquid as this may damage the cushion and affect mask performance.
• Discard the cushion if it is submerged in liquid or heavily soiled.

The AirTouch F20's memory foam cushion is designed to last only one month before needing replacement.

Cleaning Tips

1. The frame and elbow should be washed daily in warm water with a mild detergent.
2. Use a soft brush (like a toothbrush) to clean the components if needed.
3. Rinse well and allow to dry out of direct sunlight. The headgear should be hand washed weekly in the same manner.
4. The cushion can be wiped daily but cannot be washed and should be replaced every 30 days.

Use with Ozone Cleaners

The AirTouch F20 cushion should never be placed inside of an ozone cleaning device as it can result in damage to the cushion. The cushion should be wiped daily only.

Tips & Tricks for Obtaining the Best Fit

1. Remove all packaging from the mask, headgear, and elbow.
2. Detach the magnetic headgear clips from the base of the AirTouch mask cushion, if applicable.
3. With the headgear attached to the mask frame, pull the mask over your head with the ResMed label facing outward.
4. Before the mask settles on the face, move the cushion around to ensure it is fitting properly on the bridge of the nose.
5. With the cushion positioned, pull the lower headgear straps toward the mask and connect the clips to the blue magnet. Note: The lower headgear straps need to fall below the ears.
6. Lift and pull the tabs located at the top of the headgear to apply or loosen tension for a secure fit. Re-attach the tab to the headgear.
7. Then adjust the bottom headgear straps in the same manner, if needed.
8. Join the air tube and elbow together to form one piece.
9. Insert the elbow into the round opening on the full face cushion, and attach the CPAP hose to the elbow.