AirTouch™ F20 Full Face CPAP Mask Assembly Kit
AirTouch F20 Full Face Mask Assembly Kit Overview
The AirTouch F20 Full Face Mask Assembly Kit takes the solid design of the popular AirFit™ F20 and adds the alternative UltraSoft™ memory foam cushion. The cushion is designed to provide a superior fit, however must be disposed of after 30 days and replaced.
The AirTouch™ F20 Full Face Mask Assembly Kit by ResMed is a full face mask which delivers air to both the nose and mouth. This is the mask only. The headgear is not included with this product.
- UltraSoft™ Memory Foam Cushion
- 30-Day Disposable Cushion Design
- F20 Frame
- No Forehead Support
- Quick Release Elbow
- Diffused Venting
- New QuietAir Elbow Included With Purchase
30-Day Disposable UltraSoft™ Memory Foam Cushion
The AirTouch™ F20's differentiating feature from the original Airfit™ F20 is the mask's cushion. The cushion has a memory foam layer that seals on the face instead of traditional silicone. The memory foam is intended to provide a much better fit and seal than silicone.
Due to the nature of the foam, it cannot be washed like a traditional mask. The foam can be wiped daily, but the cushion is only intended to last 30 days before being disposed of and replaced.
Looking for an F20 mask assembly kit that lasts 3-6 months? See the AirFit™ F20 Full Face Mask Assembly Kit.
The AirTouch™ F20 uses the same frame and headgear as the AirFit™ F20, meaning that the cushions between the two versions are interchangeable. Existing users of the F20 can purchase the UltraSoft™ memory foam cushion to try on their existing mask, and users who purchase the AirTouch™ F20 can purchase the silicone AirFit™ F20 cushion to try if desired. The frame is one size and fits all three sizes of F20 cushions.
Interested in purchasing the mask and headgear together? Visit these pages:
Quick Release Elbow with Diffused Venting
The Airtouch™ F20 mask elbow is easily added or removed from the mask using the built-in tabs. Simply press the tabs and pull the elbow off of the mask, and click back in to put back in place. The elbow has numerous ports around the elbow allowing air to flow in various directions, making for quieter and less forceful exhalation.
New QuietAir Elbow Included With Purchase
ResMed has developed a new QuietAir Elbow for the F20 Series of CPAP masks which is 89% quieter than the previous elbow. This is included for free with your purchases of this mask.
This Product Includes...
- 1 - Assembly Kit in Selected Size (Mask Frame, Cushion, and Elbow)
CPAP.com always offers these services
- 24 hour access to our CPAPtalk.com Support Forum
- Learning Center for information on sleep apnea and cpap equipment
- Consumer Purchasing Trends Reports
- Warranty Services for all items purchased through CPAP.com
- Insurance Compliant Invoices
- Free Prescription Request System
- Some product images supplied by ResMed © ResMed 2010 Used with Permission.
- All services provided by CPAP.com, including advertisement, ordering, sale, delivery, instruction, and setup of the products are performed solely by CPAP.com and independently of the manufacturer.
Unlike silicone cushions that can be washed daily and used for up to 3-6 months, the UltraSoft™ memory foam cushion cannot be washed, only wiped daily with an alcohol free mask wipe. Do Not allow the memory foam to get wet.
The cushion has a suggested replacement time of 30 days.
The frame and elbow should be washed daily in warm water with a mild detergent. Use a soft brush to clean the components if needed. Rinse well and allow to dry out of direct sunlight.
The AirTouch™ and AirFit™ F20 masks use the same frame and headgear, meaning their cushions are interchangeable.
Cautionary Tip: Magnetic Headgear Clips
The manufacturer issues the following statement in the product user manual: "Magnets are used in the lower headgear straps and the frame of the AirFit N20. Ensure the headgear and frame is kept at least 50 mm away from any active medical implant (eg, pacemaker or defibrillator) to avoid possible effects from localized magnetic fields. The magnetic field strength is less than 400 mT."
Where Do I Find the Size?
The frame is one size; therefore, a size indicator is not found on the mask frame.
The cushion size is printed below the round opening on the mask cushion. A printed black circle with a white letter represents the size of the cushion. The letter S represents a Small cushion, M represents a Medium cushion, and L represents a Large cushion.
Use with Ozone Cleaners
The AirTouch F20 cushion should not be placed inside of an ozone cleaning device as it can result in damage to the cushion. The cushion should only be wiped daily only.
Fits better around eyes and ears than the Quattro FX
Highly recommend this mask. Been using a full face mask for the past 10 years. I have a full beard and for the first time, have 0 leaks. It also doesn't have to be tight against my face, putting a lot of pressure on my face when I wake up. Just let the memory foam do its job. Can't recommend enough. more...
I purchased this as a replacement. Easy checkout and quick shipment. I will be purchasing from them again.
I decided to order a mask that offered a softer impact on my face as each morning I had lines from the headgear. The softer foam on the new mask does conform better than just the silicone one I had prior. So far I am pleased with the new mask. more...
When I first bought this mask kit I absolutely loved it. It’s the only mask I can stand to wear through the night. It came with 2 elbows at the time. Since then both elbows have started to leak. I looked for a replacement elbow, and was shocked to find they don’t have it. The only way to get a new elbow is to buy the entire kit again! I was told that the new kit would come with 2 elbows again, so I spent the money on the whole thing again. I received the kit today to find it only has 1 elbow in it! I called to ask why, and they said that’s how they come now! Disappointed in cpap.com and disgusted with ResMed. I guess I’ll be back on the hunt for a new mask and will never be buying ResMed again. more...