ResMed AirTouch™ F20 Mask with Headgear + 2 Replacement Cushions Bundle

Compatibility:

This mask is compatible with all CPAP machines, including the AirMini, when using the AirMini F20 elbow adapter.

Mask Type: Full Face

Headgear / Frame Sizes:

• Small
• Medium
• Large

Suggested Replacement Schedule:

The memory foam cushion should be replaced every month.

Cleaning Instructions: Yes

Headgear Included: Yes

Replaceable Cushion: Yes

Cushion Type: Memory Foam

Includes Multiple Cushion Sizes: Yes

Good For:

• Mouth Breathing

Sleep Position:

• Back
• Side

Breathing Preference: Combo

Product Warnings:

WARNINGS

• CONTAINS MAGNETS: Magnets are used in the lower headgear straps and the frame of the AirTouch F20. Ensure the headgear and frame is kept at least 50 mm away from any active medical implant (eg, pacemaker or defibrillator) to avoid possible effects from localized magnetic fields. The magnetic field strength is less than 400 mT.
• The mask should not be used unless the device is turned on. Once the mask is fitted, ensure the device is blowing air.
• As with all CPAP masks, some rebreathing may occur at low CPAP therapy pressures.
• This foam cushion cannot be washed. Spot clean only.

The memory foam cushion should be replaced every month.

Tips & Tricks for Obtaining the Best Fit

• Remove all packaging from the mask, headgear, and elbow.
• Detach the magnetic headgear clips from the base of the cushion, if applicable.
With the headgear attached to the mask frame, pull the mask over your head with the ResMed label facing outward.
• Before the mask settles on the face, move the cushion around to ensure it is fitting properly on the bridge of the nose.
• With the cushion positioned, pull the lower headgear straps toward the mask and connect the clips to the blue magnet. Note: The lower headgear straps need to fall below the ears.
• Lift and pull the tabs located at the top of the headgear to apply or loosen tension for a secure fit. Re-attach the tab to the headgear.
• Then adjust the bottom headgear straps in the same manner, if needed.
• Join the air tube and elbow together to form one piece.
• Insert the elbow into the round opening on the full face cushion, and attach the CPAP hose to the elbow.

Where Do I Find the Size?

The frame is one size; therefore, a size indicator is not found on the mask frame.

The cushion size is printed below the round opening on the mask cushion. A printed black circle with a white letter represents the size of the cushion. The letter S represents a Small cushion and an M represents a Medium cushion.