SUNSET Bacteria Filter Single

Add an extra layer of protection between your machine and hose with the SUNSET Bacteria Filter Single. This disposable, in‑line filter is engineered to trap and remove bacteria, mold, and germs, helping deliver cleaner therapy air—especially helpful if you live with seasonal sensitivities or shared spaces. The filter offers 99.97% filtration at a 0.3 micron rating with 99.99+% bacterial and viral filtration efficiency, and it’s latex‑free. It clips directly to your CPAP hose, so setup stays simple and your routine remains familiar. Replace about every 30 days, or sooner if visibly dirty, to keep performance consistent. *A tiny add‑on that keeps the big stuff out.*

• 99.97% at 0.3 micron rating
• 99.99+% bacterial filtration efficiency
• 99.99+% viral filtration efficiency
• Latex‑free, disposable design

Enjoy cleaner air without complicating your nightly routine. The filter supports hygienic therapy and is often appreciated by allergy‑prone users. Know these points for the best experience:

• For APAP users, the filter may restrict airflow.
• If your average pressure is 7 cm H2O or less, you may be advised not to use it.
• For children and those who are pregnant or breastfeeding, the generic filter may contain phthalates which may cause adverse health effects.

Installs in seconds—place it between your machine’s outlet and standard tubing, and you’re set.

• Compatible with most machines; a few heated/micro hoses are exceptions
• Not for use with ClimateLineAir AirSense/AirCurve 10 (see the ClimateLineAir Heated Tubing)
• Also not compatible with: PR System One 60 Series heated tube; S9 ClimateLine; ThermoSmart 600 Series; DreamStation Go 12mm Micro; AirMini 15mm hose
• Replace about every 30 days or when soiled
• Wipe the exterior only; do not get the filter wet

This in‑line filter provides 99.97% filtration at a 0.3 micron rating with 99.99+% bacterial and viral filtration efficiency, helping deliver purified therapy air throughout the night. Compatibility The SUNSET Bacteria Filter Single works with most CPAP setups that use standard tubing. It is not compatible with certain heated or micro hoses, including ResMed’s ClimateLineAir for AirSense/AirCurve 10 see ClimateLineAir Heated Tubing and the AirMini tubing. Also not compatible: PR System One 60 Series heated tube; S9 ClimateLine; ThermoSmart 600 Series; DreamStation Go 12 mm Micro.Installs between the machine outlet and standard CPAP tubing. Setup and maintenance Clip the filter onto your hose at the machine outlet, then start therapy as usual. Wipe the exterior only with a damp cloth as needed. Do not get the filter media wet, and replace the filter about every 30 days or sooner if it fills with debris. Important cautions For APAP users, the filter may restrict airflow; if your average pressure is 7 cm or less, you may be advised not to use it. For children and those who are pregnant or breastfeeding, the generic filter may contain phthalates which may cause adverse health effects.