AirFit™ F20 For Her Full Face Mask Assembly Kit

Tips to Fit the AirFit F20™ For Her Assembly Kit

1. Detach the magnetic headgear clips from the base of the cushion, if applicable.
2. With the headgear attached to the mask frame, pull the mask over your head with the ResMed label facing outward.
3. Before the mask settles on the face, move the cushion around to ensure it is fitting properly on the bridge of the nose.
4. With the cushion positioned, pull the lower headgear straps toward the mask and connect the clips to the blue magnet. Note: The lower headgear straps need to fall below the ears.
5. Lift and pull the tabs located at the top of the headgear to apply or loosen tension for a secure fit. Re-attach the tab to the headgear.
6. Then adjust the bottom headgear straps in the same manner, if needed.
7. Join the air tube and elbow together to form one piece.
8. Insert the elbow into the round opening on the full face cushion, and attach the CPAP hose to the elbow.

Cautionary Tip: Magnetic Headgear Clips

The manufacturer issues the following statement in the product user manual: "Magnets are used in the lower headgear straps and the frame of the AirFit N20. Ensure the headgear and frame is kept at least 50 mm away from any active medical implant (eg, pacemaker or defibrillator) to avoid possible effects from localized magnetic fields. The magnetic field strength is less than 400 mT."

Cleaning Tips

It is recommended that the mask be washed before each use or after each use.

Where Do I Find the Size?

The frame is one size; therefore, a size indicator is not found on the mask frame.

The cushion size is printed below the round opening on the mask cushion. A printed black circle with a white letter represents the size of the cushion. The letter S represents a Small cushion, M represents a Medium cushion, and L represents a Large cushion.