Luna H60 Humidifier Chamber
Luna H60 Humidifier Chamber
Ships same day if ordered before 4 PM CST
Free shipping on orders over $99
100% price match guarantee
FSA/HSA eligible
Water Chamber for Luna Integrated H60 Heated Humidifier
Water Chamber for AirSense 10, AirStart 10, and AirCurve 10 HumidAir Heated Humidifier
Standard CPAP Hose (CPAP Tubing) - 6 Foot Long 19mm Diameter with 22mm Rubber Ends
Filters for Airsense Machines - Series 10
HumidX for AirMini Travel CPAP Machine
Nasal Pillows for AirFit P10 Nasal Pillow Mask
Full Face Cushion for AirTouch F20 Mask
AirSense 11 Disposable Filters
SlimLine Tubing for AirSense 11, AirSense/AirCurve 10, & S9 CPAP/BiPAP Machines
Cushion and Clip for Mirage Quattro Full Face Mask
ClimateLineMAX Oxy Air Tubing with Supplemental Oxygen Port For S9 Machines
Headgear for AirFit F20 and AirFit F20 For Her Full Face Mask
Heated Tube for DreamStation CPAP Machines
AirMini Mask Setup Pack
Cushion for AirFit F20 and AirFit F20 For Her Full Face Mask
Generic Outlet Bacteria Filter
Filters for DreamStation Machines
AirMini Fine Filters
Nasal Pillows for Swift FX CPAP Mask
Headgear for AirFit P10 Nasal Pillow CPAP Mask
Standard Water Chamber for AirSense 11 Humidair Heated Humidifier
Cushion for AirFit N20 & AirFit N20 for Her Nasal CPAP Masks
AirMini Premium Carry Bag
Water Chamber for DreamStation Heated Humidifier
Frame for DreamWear CPAP Masks
CPAP.com Medical Identification Luggage Tag for CPAP Equipment
Cushion for AirFit N30i Nasal CPAP Mask
Machine Travel Case for AirMini Travel CPAP Machine
Zephair AirMini Universal Adapter - Use Any Mask!
Memory Foam Nasal Replacement Cushion for AirTouch N20, AirFit N20, and AirFit N20 for Her
DreamStation Heated Humidifier
Heat Moisture Exchange Unit for CPAP Machines
Filters for DreamStation 2
Headgear for DreamWear Nasal CPAP Mask
ResMed AirMini Mask Connector
Power Supply for AirSense 11 CPAP Machines
Headgear for AirFit N20 & AirFit N20 for Her Nasal CPAP Masks
Short Tube Assembly for Swift FX Nasal Pillow (elbow, short tube, and swivel)
Nasal Cushion for DreamWear CPAP Mask
Washer for SleepWeaver Elan Nasal CPAP Mask
Healthy Hose Pro Antimicrobial CPAP Tubing
Water Chamber for PR System One Heated Humidifiers - Universal Kit
Nasal Pillows for AirFit P30i Nasal Pillow Mask
Sunset 6 Foot CPAP Tubing
DC Converter 24V 90W For AirStart 10, AirSense 10, and AirCurve 10 Machines
Cushion for AirFit F30 Full Face Mask
Dual-Wall Spring Air Cushion for Mirage FX Nasal CPAP Mask
ResMed AirFit F30i Cushion Replacement
Cushion for AirFit F10 and Quattro Air Full Face Mask
-  
-  
Details
MoreThe replacement Luna H60 Water Chamber for the Integrated H60 Heated Humidifier used with the Luna CPAP Machine should be replaced every six to twelve months to keep your CPAP equipment working like new. The water chamber holds 350 mL of water and should be cleaned regularly to ensure optimal humidification for extra comfort with your CPAP therapy.
The replacement Luna H60 Water Chamber is the same chamber included with the Luna Integrated H60 Heated Humidifier at the time of purchase.
This product only includes the replacement chamber for the heated H60 humidifier.
Introducing humidification to your continuous positive airway pressure, especially if you have a respiratory condition or suffer from nasal congestion, can supply your sleep apnea therapy with excellent comfort to help you better adjust to sleep therapy.
General Tips Section
How do I Fill the Water Chamber?
Lift the lid of your integrated humidifier to withdraw the chamber from the device. Please Note: The heater plate, located on the bottom of the chamber, will be hot after recent use. After turning the machine and humidifier OFF, please allow at least 15 minutes to pass before removing the chamber. Then, complete the following steps:
- DO NOT fill the hole on the top of the chamber with water. Turn to view the underside of the water chamber to locate the small dial on the front left side of the chamber.
- With the bottom facing upward, grip and turn the water inlet cap in a counterclockwise direction until the arrow on the cap is facing the triangular mark by the opening.
- Release any residual water still sitting in the chamber to ensure all of the water is fresh.
- Add approximately 350mL of water into the water inlet.
- DO NOT exceed the maximum water level.
- Place the water inlet cap over the opening and turn it in a clockwise direction to lock the cap in place. The arrow on the cap will be locked once it is directly across from the circular symbol.
L4510
Specs
MoreN/A
N/A
N/A
Mfg 3 Month
L4510
Fast, free shipping on orders over $99
Get the best price with our 100% Price Protection Guarantee
Discounted replacements with Subscribe & Save
Try any CPAP mask for 30 days, risk-free