19mm CPAP Hose 8ft

Roscoe Medical
cpap.com is an authorized seller of all Roscoe Medical products

19mm CPAP Hose 8ft

Regular price $8.25
Regular price Sale price $8.25
Sale Out of Stock
Shipping calculated at checkout.
Size

Please select a Size

Qty 1
1
2
3
4
  • Ships same day if ordered before 4 PM CST

  • Free shipping on orders over $99

  • checkmark icon

    100% price match guarantee

  • FSA/HSA eligible

  • The 8 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends is a longer version of the standard hose packaged with many CPAP and BiLevel machines. The non-heated hose has a 19mm interior diameter and a 22mm diameter rubber cuff. The standard cuff size allows the 8 foot hose to connect to any machine compatible with a standard hose.

    This hose is designed to increase range of motion for the user by offering 96 inches of freedom during sleep therapy. The longer hose does not vary in quality. Those who sleep toward the middle of the bed or have a larger distance from the bed to the machine may benefit from the additional length.

    Please Note: This hose is NOT compatible with a machine that requires a 15mm hose referred to as "thin" or "slim". In order to ensure compatibility, the machine MUST have the option to select the setting based on the diameter of the hose. The diameter of the hose will directly impact the delivery of prescribed pressure during sleep therapy, so the machine needs to accommodate the proper diameter of the hose.

    Like all CPAP.com brand hoses, the hose is smooth on the inside due to the smooth bore design. The construction of the hose is intended to provide consistent pressure delivery and to ensure a quieter performing hose. The molded plastic frame is located on the outside of the hose for support.

    The 8 Foot 19 mm Diameter CPAP Hose with 22mm Rubber Ends is latex free.

    General Tips Section

    Please Note: The color of the hose may vary; but performance is not affected.

    Hose Tips

    The original or 'standard' diameter for a CPAP therapy hose is 22mm and can be used with the majority of CPAP, Auto Adjusting and BiLevel or BiPAP machines. Some machines require a 15mm tubing referenced as "Thin" or "SlimLine™" and are designed to work ONLY with a 15mm hose. Other machines allow for the selection of either a 22mm or a 15mm hose. Still other machines use ONLY a heated hose specific to that line of devices and cannot use a non-heated hose of any diameter.

    Compatibility Tips

    This 8 foot CPAP hose with rubber ends is a standard diameter size, non-heated hose. It is compatible with machines that can use a 22mm hose. It is not appropriate for use with a machine that can use only a 15mm hose or only a heated hose.

    This hose is NOT compatible with the following machines:

    • AirMini™ AutoSet Travel CPAP Machine
    • Puritan Bennett GoodKnight 420S and 420E CPAPs
    • GoodKnight 425 or KnightStar 330 BiLevels

    All of these machines have hoses with built-in pressure sensor tubes. This hose does not have that feature.

    This product DOES NOT contain Latex rubber.

    SKUHS-SD-RMC-RSCTUB-SZ-8
    Info Icon Product Info icons This product is coming soon. Mar. 13
    Product image for 8 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends

    19mm Diameter CPAP Hose with 22mm Rubber Ends

    Regular price $8.25
    Regular price Sale price $8.25
    Sale Out of Stock
    Added to Cart ()
    We Also Recommend

    Details

    More

    The 8 Foot Long 19mm Diameter CPAP Hose with 22mm Rubber Ends is a longer version of the standard hose packaged with many CPAP and BiLevel machines. The non-heated hose has a 19mm interior diameter and a 22mm diameter rubber cuff. The standard cuff size allows the 8 foot hose to connect to any machine compatible with a standard hose.

    This hose is designed to increase range of motion for the user by offering 96 inches of freedom during sleep therapy. The longer hose does not vary in quality. Those who sleep toward the middle of the bed or have a larger distance from the bed to the machine may benefit from the additional length.

    Please Note: This hose is NOT compatible with a machine that requires a 15mm hose referred to as "thin" or "slim". In order to ensure compatibility, the machine MUST have the option to select the setting based on the diameter of the hose. The diameter of the hose will directly impact the delivery of prescribed pressure during sleep therapy, so the machine needs to accommodate the proper diameter of the hose.

    Like all CPAP.com brand hoses, the hose is smooth on the inside due to the smooth bore design. The construction of the hose is intended to provide consistent pressure delivery and to ensure a quieter performing hose. The molded plastic frame is located on the outside of the hose for support.

    The 8 Foot 19 mm Diameter CPAP Hose with 22mm Rubber Ends is latex free.

    General Tips Section

    Please Note: The color of the hose may vary; but performance is not affected.

    Hose Tips

    The original or 'standard' diameter for a CPAP therapy hose is 22mm and can be used with the majority of CPAP, Auto Adjusting and BiLevel or BiPAP machines. Some machines require a 15mm tubing referenced as "Thin" or "SlimLine™" and are designed to work ONLY with a 15mm hose. Other machines allow for the selection of either a 22mm or a 15mm hose. Still other machines use ONLY a heated hose specific to that line of devices and cannot use a non-heated hose of any diameter.

    Compatibility Tips

    This 8 foot CPAP hose with rubber ends is a standard diameter size, non-heated hose. It is compatible with machines that can use a 22mm hose. It is not appropriate for use with a machine that can use only a 15mm hose or only a heated hose.

    This hose is NOT compatible with the following machines:

    • AirMini™ AutoSet Travel CPAP Machine
    • Puritan Bennett GoodKnight 420S and 420E CPAPs
    • GoodKnight 425 or KnightStar 330 BiLevels

    All of these machines have hoses with built-in pressure sensor tubes. This hose does not have that feature.

    This product DOES NOT contain Latex rubber.

    Specs

    More

    FAQs

    More

    What is CPAP tubing / CPAP hose?

    CPAP tubing and CPAP hose are interchangeable terms. CPAP hoses / tubing are used for two main purposes: to connect a CPAP or BiLevel machine or a humidifier to a mask, or to connect the machine to a humidifier. Machine to Mask Hose. A hose is connected to the air outlet of either the machine or humidifier and it connects to the CPAP mask to deliver the airflow to the mask. In the past, the hose used to connect a machine to mask was a standard size. Today, there are a number of different hose options. There are three types of machine to mask hoses:

    • Standard / Performance Hose:A long hose or tube is included with each CPAP / BiLevel machine purchase. The connections on all CPAPs, humidifiers and masks are a standard size, so a standard CPAP hose will fit on all. Standard hoses are also available in 8 foot and 10 foot sizes. There are lighter hoses available that were designed to be more flexible and put less pull on the CPAP mask.
    • Heated Hose: A heated CPAP hose contains copper coils embedded in or wrapped around the length of the hose. These coils conduct a constant temperature through the hose. The majority of heated hoses are specific to the machine.
    • Hose with Sensor Line: A few auto-titrating CPAPs and Bilevels require a pressure line sensor fitted into the hose to detect breathing patterns and pressure needs but the majority of those machines are no longer in production. (Machines which use the tubing pictured below have been discontinued by the manufacturer.)

    Humidifier Hose.

    Humidifier hoses connect a CPAP or BiLevel machine to a stand alone humidifier. Humidifier hoses are shorter than standard hoses. They come in either

    18

    or

    24

    inch lengths.

    Are all CPAP hoses the same?

    In years gone by, the answer to this question would have been "yes", but today not all hoses are the same and some machines use different hose types. All CPAP hoses / tubings serve the same function: directing the air stream from the machine to the mask. Historically, a standard CPAP hose is six feet long, has an internal diameter of 19mm and a connector cuff with an internal diameter of 22mm. Today some hoses are 6 feet long, others are 4 foot long, 8 foot long and 10 foot long. Some hoses have an internal diameter of 19mm (standard) and others have an internal diameter of 15mm (thin or slim style). To use a slim 15mm hose, the machine must have a menu option setting to accept the narrower diameter of a 15mm hose and still deliver the prescribed pressure to the mask to ensure effective therapy. All hoses have a 22mm connection cuff and fit on all CPAP masks. The connection ports on all CPAP, APAP and BiLevel machines, humidifiers, and masks are a standard size, so a standard CPAP hose will fit on all. Some of the very small machines use a hose adapter between the machine and the 22mm cuff of the hose. Some manufacturers offer a heated hose option designed to work only with their machines. To read more about heated hoses see the "What is a heated CPAP hose?" article included in this FAQ section. A few auto-titrating CPAPs and BiLevels require a pressure line sensor to detect breathing patterns and pressure needs. The sensor may be in the form of an adapter with narrow tubing attached or the narrow tubing is threaded inside the six foot hose. In both cases, one end of the narrow tubing is plugged into the machine. Those machines will not operate without the pressure line sensor.

    What is a heated CPAP hose?

    A heated CPAP hose contains copper coils embedded in, or wrapped around, the hose. These coils are gently heated to conduct a constant temperature throughout the length of the hose. This enhances the comfort of the therapy and reduces or eliminates rainout caused by the water condensing as it travels through the hose to the mask.

    Heated hoses are more expensive alternatives to cloth tubing insulation, but they prevent rainout in nearly all cases. The Hybernite Rainout Control System is a stand alone option that can be used with any machine to prevent rainout and increase delivered humidification.

    Some manufacturers have developed heated hoses to work specifically with select machines in their product lines. The ClimateLineAir™ Heated Tube for AirSense™ 10 and AirCurve™ 10 Machines is an example of a heated hose used by the AirSense™ 10 and AirCurve™ 10 Machines.

    Here are some heated hoses we carry:

    ComfortLine Heated Tubing Kit

    ClimateLine™ Tubing for S9™ and H5i™ Climate Control System

    PR System One Heated Tube for 60 Series Machines

    + See More

    What is a hose cover?

    A hose cover is placed over the hose in order to insulate the hose and to make the hose more comfortable. The simplest and most cost effective way to insulate a CPAP hose is to wrap it in an insulating fabric. This enables the hose to remain flexible and adds little weight. Companies such as Snugglehose provide a cost effective tubing insulation available in several colors and styles. Not only will the covers reduce or eliminate rainout, they also provide a more personal and less institutionalized appearance. An example of a Snugglehose is shown below. Here are some hose covers we carry: Tubing Wrap for AirSense™ 10, AirCurve™ 10, and S9 Series SlimLine™ TubingRespironics Insulated Hose CoverResMed Zippered Tubing Wrap+ See More

    What is rainout?

    Rainout is the accumulation of water in a CPAP tube due to warm moist air cooling on its way from your CPAP machine to your CPAP mask. Solutions to rainout include raising the temperature of your bedroom, insulating your tubing with a Snugglehose, or purchasing a CPAP machine with an integrated heated hose.

    How do I clean a CPAP hose?

    Your CPAP hose will last longer if it is detached every morning and hung to air dry.

    Drying the hose each morning will also prevent bacteria from growing in the damp interior and help reduce the possibility of colds and other health issues. Remember, what is in the hose goes into the airway.

    If you are not drying the hose daily, then be sure to replace the hose very frequently as negative health issues will result!

    Hose care tips:

    • Remove the hose by gripping the end or cuff, not the hose itself
    • Hang the hose to dry after each use
    • Wash hose weekly to avoid residue and maintain health
    • Protect the hose from curious pets

    Hose care tools:

    How often should I replace my CPAP hose?

    CPAP hoses

    can last a long time, sometimes up to a year if taken care of properly. Signs of wear include dry, cracked places on the inside lining or on the rubber ends; "stretch marks" near the rubber ends; mineral deposits or mold from water left inside the hose; or a visible puncture or tear in the material.

    How do I avoid getting tangled in CPAP hoses?

    There are a few ways to keep from getting tangled up in your CPAP tubing. Try running your CPAP hose behind the headboard of your bed. Also, there are several types of suspension systems we carry here at CPAP.com. You can see the different types of Hose Management Systems under our Comfort & Cleaning section. One example is the HoseBuddy Tangle Free CPAP Hose Suspension System:

    Here are some items we recommend that may help with hose comfort: CPAP Hose LiftHoseBuddyTube Management Clip+ See More

    Fast, free shipping on orders over $99

    Get the best price with our 100% Price Protection Guarantee

    Discounted replacements with Subscribe & Save

    Try any CPAP mask for 30 days, risk-free 

    Shop Your Recently Viewed