AirSense 10 AutoSet with AirFit P30i Mask Bundle

No, the AirSense 10 AutoSet is one of the quietest CPAP machines available. It operates at just 26.6 decibels, which is quieter than a soft whisper, making it ideal for light sleepers or those with bed partners.

Yes, the AirSense 10 AutoSet is FAA-approved for in-flight use on all domestic and international flights. It's compact and lightweight design makes it easy to pack in your carry-on luggage. Just be sure to remove the water from the humidifier chamber before flying and put the device in Airplane Mode to disable wireless connectivity.

The AirSense 10 AutoSet has two filters - a disposable fine filter and a reusable standard filter. ResMed recommends replacing the disposable air filter every 30 days and the reusable filter every 6 months. Regular filter changes are important for ensuring your machine delivers clean, effective therapy and operates properly.

Yes, the ClimateLineAir heated CPAP tubing is compatible with all CPAP masks that connect to the standard tubing. This flexibility ensures that you can enjoy the benefits of heated tubing regardless of the mask type you use.

Expiratory Pressure Relief (EPR) is an advanced comfort option available on some ResMed devices that helps your CPAP therapy feel more natural; as you exhale, the AirSense 10 will reduce the pressure, making it easier to breathe.

If you’re looking for information on the AirSense 10 humidifier settings, you’ve come to the right place! From your machine’s home screen, you can easily access the Climate Control Manual Mode to switch your humidification settings. Select “My Options” and then “Climate Ctrl.” From there, you can adjust the Humidity Level and Tube Temp to the temperature you find the most comfortable.

Ramp time can be set between 5 minutes and 45 minutes, or the function can be turned off entirely.

The AirSense 10 requires to be plugged into a power source. You can find the best battery option for both your AirSense 10 and your battery backup needs here.

To change the filter on your AirSense 10 CPAP machine, follow these steps:

1. Turn off your machine and disconnect it from its power source.
2. Locate the filter compartment on the left side of the machine, towards the back.
3. Open the compartment and remove the old filter.
4. Insert the new filter and close the compartment.
5. Reconnect your machine to its power source.

You can use ResMed's sizing guide to help you find your best mask fit right from the comforts of home. If you still have questions about your mask fit, give us a call at 1-800-356-5221 or contact your doctor for additional fitting instructions.

The AirFit P30i features a QuietAir Vent at the top of the head where your CPAP hose connects to the mask. There is also a diffuser at the front of the nasal pillow, which has a removable filter for easy cleaning.

The AirFit P30i operates at 21 decibels, making it about as quiet as gently rustling leaves.

Yes. Chin straps are typically worn underneath the CPAP mask and headgear to provide better support, but some mask and chin strap combinations actually work better when the chin strap is worn over the CPAP mask, so be sure to experiment to find what works best for you.

The difference between the N30i and P30i is in the mask cushion. The N30i features a nasal cradle which seals around the outside of the nose, while the P30i features nasal pillows which seal inside the nostril. Both masks feature the same headgear, top-of-head hose connection, and 360-degree swivel elbow.