Added to Cart ()
We Also Recommend

Details

More

Redesigned with an upgraded seal and improved air-diffusing vent, the Hans Rudolph 7600 Series V2 Full Face CPAP Mask with Headgear is lighter than before and features enhancements like the new Tri-Glide adjustable top strap. This single piece mask is made of clear soft silicone rubber and features quick release clips on the headgear and a swivel port on the face piece for increased patient freedom

Updated Headgear Includes Tri-Glide Feature and User-Friendly Headgear Clips

Upgraded from its original design, the 7600 Series V2 mask includes new headgear and new headgear clips. For your comfort and convenience, the headgear includes a nylon-covered, polyurethane foam strap and quick-release clips that easily slide into the mask frame. To get the fit you want, you can loosen or tighten the strap with the Tri-Glide function.

New Seal Design is Built for Performance and Comfort

The performance of the seal has been improved and includes a membrane inside the cushion and a series of soft silicone flanges around the base for a soft, secure fit. The single molded mask frame and its cushion are made of clear silicone rubber and contour to fit different facial profiles.

Features Help Reduce Noise, Enable Movement, and Preserve Fit

The venting port has been moved from the bridge of the nose to the detachable swivel adapter, which helps direct airflow away from you and your partner for a quieter night. The 360° swivel elbow permits movement as you change sleeping positions and ensures your mask fit stays put, even if you disconnect from your CPAP machine for a quick restroom break.

Find a Just-Right Fit With Multiple Options for Headgear and Mask Sizes

Three headgear sizes are available: Small (included with the Petite and Extra Small masks), Medium (included with the Small and Medium masks), and Large (included with the Large mask).

113488,113485,113486,113489,113487

Ideal For

More
  • Active Sleepers
  • Light Sleepers
  • If You Breathe Through Your Mouth or Nose

Tips & Resources

More

The mask should be replaced once every three to six months. The silicone cushion cannot be removed or replaced.

Sizing Tips

The Hans Rudolph 7600 Series V2 Full Face Mask tends to run big. For example, the 7600 Series V2 is approximately one size larger than the Respironics ComfortFull 2 and the ResMed Ultra Mirage Full Face mask.

In other words, a size small in this mask would be comparable to a size medium in the Respironics ComfortFull 2 or the ResMed Ultra Mirage Full Face Mask.

You can download, print, and then cut out the Hans Rudolph sizing gauge for this mask here: Hans Rudolph Sizing Gauge

Hans Rudolph also provides a set of instructions on how to setup this mask: V2 Full Face CPAP Mask Fitting Instructions

Where do I find the size?

The Hans Rudolph 7600 Series V2 full-face cushion is built into the frame of the mask, and the two cannot be separated. This design does not offer a replacement cushion or frame.

To find the size of the mask, turn the mask upside down to expose the silicone chin support. Brand information is embossed into the silicone material on the chin support. Just below the name of the mask, on the second line, the user will find clear letters indicating the size of the mask.

Care & Cleaning

More

Cleaning Your Mask

  1. Slowly remove the silicone nasal cushion from the frame, and wash with warm water and mild soap.
  2. You'll need to hand wash some of the other components on the mask by using a bristle brush.
  3. Wash the headgear with warm soapy water. When you've cleaned the headgear completely, you'll want to rinse thoroughly to make sure the soap suds are removed.
  4. Set all components aside to air dry, but do not put them in direct sunlight.

Specs

More
Sound Level

N/A

Dimensions

N/A

Weight (lbs)

N/A

Pressure Range Low

N/A

Pressure Range High

N/A

Cushion Material

Silicone

Cushion Size(s)

Petite / Extra Small

Headgear Size(s)

One Size Fits Most

Mask Frame Size(s)

One Size Fits Most

Headgear Materials

N/A

Frame Materials

N/A

Warranty

Mfg 3 Month

Includes Magnets

N/A

Part Number

113489

What's Included

More
7600 Series Full Face Mask
Petite Full Face Cushion
Standard Headgear

Replacement Parts

More

Fast, free shipping on orders over $99

Get the best price with our 100% Price Protection Guarantee

Discounted replacements with Subscribe & Save

Try any CPAP mask for 30 days, risk-free 

Shop Your Recently Viewed