The M Series Pro is a small and feature packed CPAP that looks more like a stylish clock radio than a CPAP.
It easily packs away in your carry on luggage, and has an incredible number of high-tech features, including the patented C-Flex comfort feature, and powerful clinical data features, onboard.
The M Series Pro with C-Flex offers optional integrated humidification, Encore Pro SmartCard capability for advanced clinical reporting, lighted controls, an easy-to-read display and the comfort of C-Flex.
The M Series Pro sports a small, sleek device and case, a less obtrusive profile with tubing connected in the back and a "hidden" water chamber.
The Pro offers lighted primary touch controls for power, ramp, and C-Flex as well as a LCD display and controls for easy set up.
The humidifier controls have been simplified and now include an easy turn humidification dial. A water chamber that is easy to remove, fill and replace
delivers continuous humidification throughout the night.
The M Series Pro is convenient for travel with or without the integrated humidifier. The standard travel carry case has been updated with a new sleeker look.
Above: M Series Pro CPAP Rear View Smart Card Module Shown
Power Options
Universal Power
The M Series Pro operates automatically between 110v – 240v AC. When traveling either inside or outside the USA, there are no switches to switch or fuses to change. The machine will automatically sense what voltage is needed and set itself to run on the power needed.
The user will need to adapt the plug that goes into the wall to fit the style of outlet socket that is being used. This is simply done with a Power Adapter Plug kit. This is the same type of plug adapter that would be used with a hair dryer or an electric shaver.
The M Series Pro comes equipped with a DC plug on the back of the unit. This allows the user to connect the CPAP to an external DC battery source.
Using a Respironics, 12volt DC Power Cord the M Series Remstar Plus can be powered by plugging into a cigarette lighter plug. This is ideal for traveling by car, boat, or recreational vehicle that is equipped with a cigarette lighter plug.
It is recommended that you use a 100 amp hour, 12v DC deep cycle marine battery for operating you CPAP machine when not connected to 110v AC /230v AC.
There are two cables needed to configure the M Series Plus with a Marine Deep Cycle Battery. They fit together to make a connection from the back of the M Series Remstar Plus to the battery clip terminals on the marine battery.
Here are the links to the cables needed to hook up to a marine style battery. Both cables are needed.
The Respironics Battery Pack has been a long standing favorite of our customer’s. It weighs in at 13lbs and can be carried easily with its shoulder strap.
This battery pack will give roughly 26 hours of use, depending on the cpap pressure setting. (Results may vary.)
* The Respironics Battery Pack must be charged with shore power. This unit can be charged at voltages ranging from 115v – 230v.
Compare Chart Specifications
Can Be Worn:
No
Manufacturer:
Respironics
4-20 Cm:
Yes
Pressure Relief on Exhale:
Yes (C-Flex)
Integrated Heated Hose:
No
Domestic Voltage-110:
Yes
International Voltage-220:
Yes
Optional DC Cable:
Yes
Direct Battery Operation:
Yes
Integrated Battery:
No
Auto Altitude Adjustment:
Yes
Ramp:
Yes
Hour/Session:
Yes
Optional Software:
EncoreViewer
Leak Compensation:
Yes
Heated Humidifier:
M Series Heated
Passover Humidifier:
M Series Passover
Data Card:
Yes
Auto ON/OFF:
Yes
Warranty:
2 Years
Mask Off Alert:
Yes
Machine Weight:
2.2 lbs
Entire Weight:
5.5 lbs
Entire Size:
8"x 8"x4"
Entire Package Size:
12.5"x10"x7.5"
Manuals Included:
Patient/Quick Setup
Sound Level:
31-dB
Other Specifications
Ramp Time 0 to 45 min. (5-min. increments)
Starting Ramp Pressure 4 to CPAP; user adjustable
Dimensions 7.5” L x 5.0” W X 3.125” H (19cm L x 12.7 cm W x 7.9 cm H)
Filters Pollen and optional ultra-fine
Device Set-Up LCD/Keypad and Encore Pro SmartCard
Data Storage Capacity SmartCard: 6 months a 3 usage sessions per day, 7 days in-depth analysis
Data Storage Content SmartCard: Date/time, hours of use, usage patterns, AHI, leak, snore, FOSQ
Electrical Requirements 100 – 240 VAC, 50/60 Hz (An adapter may be needed to plug the CPAP into a wall outlet outside the US.) 12volt DC
Special User Features Lighted LED’s, mask off alert
Our Comments
The optional M Series Heated Humidifier is not included with this listing but can be purchased separately.
The optional Respironics EncoreViewer Software 1.0 and card reader are not included with this listing but can be purchased separately. The smart card and smart card writer are standard with this machine.
User Reviews
Excellent machine
October 23, 2008
(4 out of 5) by John
"Great product, with the exception of one thing... the blue lighted buttons are FAR TOO BRIGHT! Subjective, of course, but I had to take measures to block the light.
In the "nice to have" category, a backlit LCD display would be useful for the user."
Very Quiet
October 08, 2008
(5 out of 5) by Peter S, SACRAMENTO, CA
"My old Resmed with 10,700 hours on it had been slowly losing pressure, and I didn't realize it. So when I got my new Resmed I was a little surprised at the new pressure (which is the prescribed pressure of 6 cm), but it is very nice. The best feature is the quiet operation. My wife can't even hear it. Also this is my first use of the C-flex, which reduces pressure when I breath out. It is a nice feature. Overall I'm very pleased."
M Series Pro C-Flex
August 15, 2008
(5 out of 5) by Timothy K D, Bellingham, WA
"Excellent, reliable machine. I especially like the ramp-up feature that starts the air pressure at a low level and gradually increases it to the prescribed treatment level. Comes with a smart card installed (not evident from the product description on CPAP.com). It would be nice to be able to dim the blue illuminated control buttons on the top of the machine at night but this is a very minor issue. Overall, a great machine."
Love It
August 15, 2008
(5 out of 5) by Todd R, Indianapolis, IN
"I absolutely love this new machine. My previous M-Series had alot more noise! I would buy another in a heartbeat! If I had one complaint it would be the lighting for the buttons is way too bright. I have to cover the machine with a rag to "turn out" the lighting. It be nice if this were to dim or turn off automatically after some preset time when the machine is started."
The "Full Support MSRP" of this product is $1269.00. The price you pay for this product includes the following services:
8 AM to 10 PM CST Toll Free Phone Support
Email Support
Custom Mask Fitting Guide
CPAP, APAP and BiPAP Mask Comparison Guide
Newsletters and Newsletter Archives
Local Sleep Services Locator
Consumer Preference Reports
Introduction To Sleep Apnea Information
Answers Section Including
CPAP and Sleep Apnea Basics
Machines
Masks
Humidifiers
Power
Filters
Software
Tubing (CPAP Hoses)
Chinstraps
Placing Your Order
Prescriptions
Shipping
Pricing
Insurance
Common CPAP Side Effects
CPAP Brands
Sleep Study
CPAP and Sleep Apnea Definitions
Product Specific Questions and Answers
CPAP Video Library
Warranty services for all items purchased through CPAP.com
CPAPtalk.com CPAP Community Content
A valid prescription is required for the purchase of this product.
We are only authorized to sell and ship Respironics products to end-users residing in the United States.
Respironics recommends that new patients purchase their devices, masks and initial accessories from a homecare company that can provide individualized patient equipment set-up, clinical and after-sales support and a program to assist patients with therapy success.
This is a 
