Nasal Pillows for ComfortLite 2

The three choices are the Pillows cushion, the Simple Cushion and the Direct Seal cushion.

The three choices are the Pillows cushion, the Simple Cushion and the Direct Seal cushion.

The pillows cushion inserts slightly into the nostrils for a robust seal.

There are 4 sizes: petite, small, medium and large. That is a broader size range than other pillows masks on the market; fitting a larger proportion of patients interested in using pillows.

The Simple Cushion is a small tip-of-the-nose, more traditional dual flap nasal cushion with less pressure points because it does not sit on the bridge of the nose. The cushion attaches to a ball socket which includes an exhalation port.

Yes.

No, the ComfortLite 2 has several 'combo packs' that include two types of cushions in one. Also, you can order all cushions separately if you'd like to try all three!

No.

One unique feature of these two cushions is that they include a metal band on the bottom side of them. The metal band is pliable and allows you to change the angle of the pillows or bulbs; a squeeze brings the bulbs closer together, helping you to direct the airflow to a more comfortable direction.

Yes, the band can also be used to spread the pillows apart, so you have the ability to find a comfortable angle for the airflow on a daily basis, as desired.

The Halo headgear has two soft, comfortable straps that extend from the center of the forehead and merging into a single, wide strap at the back of the head. It sits low at the neck. The ‘halo’ itself is a flexible oval shaped piece worn up the center of the head to just below the crown.

Most headgears are a means to attach and stabilize the mask to the face or nose. The Halo headgear sits low at the center of the forehead and has the Vertical and Angle adjusters suspended from it there. A Crown Swivel is at the upper end of the Halo.

You will always use the lowest of the eyelets for the lower strap. This is for stability. The upper strap can be attached in any of the 4 remaining eyelets – adjust for comfort.

No, the headgear only touches the forehead. The cushions only touch either under the nose (Pillows and Direct Seal) or gently around the tip of the nose (Simple Cushion).

There are two key adjustments you can make regardless of the cushion option you choose. Once the headgear is in place, you use an Angle Adjuster and a Vertical Adjuster for optimizing fit.

The Angle Adjuster controls the tilt of the cushion to the face and the twist Vertical Adjuster helps position the cushions relative to the length of your face and nose.

If you have seen a picture of the ComfortLite 2, you will notice that the cushions connect to a tube. The tube is suspended from the center of the headgear where the Angle Adjuster is. By squeezing the blue tabs on each side of the Angle Adjuster, you are able to change the angle of the tube (and cushion) either closer to or away from the face.

As you look at the mask picture, you’ll see a circular blue knob at the top of the tube connected to the ComfortLite 2 cushion. By twisting the knob, you either extend or retract the length of the tube.

There are many varieties of faces in the population and we want to accommodate both short and longer faces by extending or shortening the length of the tube for proper cushion fit. Again, depending on the cushion you use, the Vertical adjustment will be slightly different for each.

Yes. The Simple Cushion sits on a ball joint fitting. The cushion rotates freely on the ball, allowing you to change the tilt of the nasal cushion to adjust for leaks or for optimal comfort.

The swivel helps to manager your longer 6 foot hose with a 180 degree swivel which moves from one side to the other in an arch above your crown. The sleeve your hose attaches to swivels 360 degrees also.

Respironics trials found that the short and long hose easily get wrapped up around the active sleeper if not anchored. Also, the anchored swivel helps to absorb the movement of the long hose as you move. Masks often lose their seal because the weight of the long hose tugs at the mask or cushion, which is prevented by the Crown Swivel design.

No, the unique headgear on the ComfortLite 2 can only be used with this product.

Yes, the ComfortLite 2 is designed to accommodate side sleeping by providing an assembly and interface that is centered over the nose and up the center of the head.

Yes, it is very easy. To take the ComfortLite 2 off, simply grasp the angular adjustment area and pull the mask forward then lift upward. This way, the mask can be placed on and taken off without changing any of the adjustments.

The exhalation feature of the ComfortLite 2 has been placed on the elbows of the Pillow, Simple Cushion and Direct Seal cushions using a series of small holes. When using ComfortLite 2, the exhaled air is diffused through these holes for a less-direct and quiet stream of air.

Yes, this is air coming from the exhalation valve. This leak is intentional and removes CO2 from the mask. Never cover or attempt to block these holes. Your CPAP unit is designed to still provide your therapy pressure.

Yes, a chin strap can be worn underneath the ComfortLite 2 headgear.

Hand wash any Respironics mask using a mild dishwashing liquid, free of alcohol, bleach, conditioners or moisturizers. For optimal outcomes, clean the mask and cushion daily. Headgear and tubing should be cleaned at least once a week.

The Simple Cushion can be separated from the exhalation (ball-and-socket) elbow for cleaning. The Pillows Direct Seal cushions are not designed to be disassembled from their cradle or housing.

The ComfortLite 2 Pillows and Direct Seal cushions are single pieces. They both include an integrated exhalation port in their plastic housing.

Yes, all use the same un-intrusive Halo headgear and straps. You can switch from one style cushion to another in less than 5 seconds with just a simple twist and turn motion!

There are several reasons why someone might want to use a minimal contact mask like the ComfortLite 2. Some patients have trouble being compliant because of feelings of claustrophobia when wearing a mask, or they have skin sensitivities that are irritated by using larger masks on their face. Some seek improved visibility or are dissatisfied with aspects of their traditional nasal mask. Others just have a personal preference for less bulk on their face. The ComfortLite 2 helps meet all these needs.

You are the only one who can make that determination. The goal of this CPAP mask is to give you three chances to find a cushion you will like and use.

You will have slightly different angular adjustments when using the Simple Cushion vs. the Pillows or Direct Seal cushions.

Yes, there are small metal band on the underside of those cushions which allow you to adjust the distance between the pillows or bulbs to optimize your comfort and seal.