Universal 4-Point Headgear for Nasal CPAP Masks

The Universal 4-Point Headgear for Nasal CPAP Masks is a four-point strap system that connects two points to a forehead support and two points to the base of the mask frame.

The Universal 4 Point headgear has a layered design with the soft, comfortable moisture absorbing material against the face. The other layer is made of a tightly packed, open cell foam core that helps provide a cushioning feel. The geometric design with wider straps improves comfort by distributing forces over a greater area.

The Universal 4-Point Headgear for Nasal CPAP Masks is compatible with the following CPAP mask:

• ComfortGel Original Nasal CPAP Mask with Headgear
• ComfortGel Blue Nasal CPAP Mask with Headgear
• Profile Lite Gel Nasal CPAP Mask with Headgear
• ComfortClassic Nasal CPAP Mask with Headgear
• ComfortFusion Nasal CPAP Mask with Headgear
• ComfortFusion Nasal CPAP Mask with Headgear - FitPack
• Ultra Mirage™ II Nasal CPAP Mask with Headgear
• Mirage Activa™ Nasal CPAP Mask with Headgear
• Mirage Activa™ LT Nasal CPAP Mask with Headgear
• Mirage Micro™ Nasal CPAP Mask with Headgear
• Mirage™ SoftGel Nasal CPAP Mask with Headgear
• Mirage™ SoftGel Nasal CPAP Mask with Headgear - ConvertAble Pack
• FlexiFit HC405 Nasal CPAP Mask with Headgear
• FlexiFit HC406 Petite Nasal CPAP Mask with Headgear
• FlexiFit HC407 Nasal CPAP Mask with Headgear
• Zest Nasal CPAP Mask with Headgear
• Zest Q Nasal CPAP Mask with Headgear
• Lady Zest Q Nasal CPAP Mask with Headgear
• Eson™ Nasal CPAP Mask with Headgear

The color of this headgear has changed from being all black to burgundy material that is lined with black backing.

The Universal 4-Point Headgear for Nasal CPAP Masks works ONLY with the masks listed above. It is not compatible with other masks.

This headgear is latex free.

Top Forehead Strap Length: 22 inches

Bottom Mask Frame Strap Length: 21 3/4 inches

Overall Height: 6 inches

The straps are 4" apart, measured from forehead support to cushion base.

The headgear most closely resembles Respironics Premium Headgear with EZ Peel Tabs. The headgear strap length is 22" long and the arms are 4" apart, measured from forehead support to cushion base.

The Universal 4-Point Headgear for Nasal CPAP Masks works ONLY with the masks listed on the Features Tab of this product page. This headgear is NOT compatible with other masks. It will not provide the support and fit needed to ensure a good seal to provide therapy.