Lumin Bullet UV Hose Cleaner

Lumin Bullet UV Hose Cleaner Features and Benefits:

• Quickly Eliminates 99.9% of All Bacteria
• Powerful Germicidal UVC Light
• No Harsh Chemicals Required
• USB Rechargeable Battery
• Compatible With Most CPAP Tubing

Eliminates 99.9% of All Bacteria in Under Two Minutes

The Lumin Bullet CPAP hose cleaner, which doesn’t use ozone or activated oxygen, works to eliminate 99.9% of all harmful bacteria and pathogens in under two minutes by using a sanitizing probe with UV light and powerful magnets. The device can handle hose kinks and twists and turns easily as it gently glides through the CPAP hose to eliminate biofilm buildup.

Sanitize Your Equipment Without Waiting or Using Chemicals

Unlike ozone cleaners, there’s no waiting period in between cleaning and using your CPAP equipment when using a UV light cleaner. Plus, you won’t have to use harmful chemicals, vinegar, soap, or water to get the cleanest hose, making it both the most efficient and safest disinfection option - especially for hospital operating rooms! 

One Battery Charge Provides 30 Uses

One charge for this device lasts for 30 cleaning cycles. Because the long-lasting battery doesn’t require a full charge to work, you have the freedom to use the device at home or on the go whether there are 29 charges or just 2 charges left.

Compatible With Most CPAP Tubing and Heated Tubing

The Lumin Bullet is compatible with most brands of standard CPAP tubing and heated tubing except:

• ResMed ClimateLineAir™ OxyHeated Tube for AirSense™ 10 and AirCurve™ 10 Machines
• ClimateLine™ Tubing for S9™ and H5i™ Climate Control System
• ClimateLineAir™ Heated Tube for AirSense™ 10 and AirCurve™ 10 Machines
• DreamStation Go 12mm Micro Tubing

In the Box:

• Lumin Bullet
• Charging Cord
• Sanitizing Probe

Interested in learning more about the Lumin Bullet? Read our in-depth Lumin Bullet Review.

• Voltage: DC 5V 500mA
• Power Rating: 3W
• Altitude: Up to 6,651 Feet
• Charging Cord: Standard USB, Does Not Include AC Adapter

Charging the Lumin Bullet

In order to charge the Lumin Bullet, you'll need to plug the included micro USB cable into the bottom of the silver sanitizing probe, and connect the larger end into a USB charging plug. The same plug that works for your cellphone charger will work for the Lumin Bullet.

After plugging the USB charging plug into the wall, the probe should glow red while charging, and light up green when fully charged.

How to Sanitize Your Hose with the Lumin Bullet

Follow these steps to sanitize your hose with the Lumin Bullet:

1. Pull the CPAP tube through the outer casing, just enough so the very tip remains sticking out.
2. Close the casing and lock it, by sliding the latch to the left.
3. Insert the sanitizing probe in the same end of the tube.
4. Allow the probe to slide back into the hose. The magnets of the casing should catch it, and hold it inside the hose near the center of the casing.
5. Slide the casing towards the opposite end of the hose. The sanitizing probe should follow the path of the casing as it travels the length of the hose, remaining inside the casing at all times while the ultraviolet light gets to work removing harmful germs and bacteria. When reaching the end of the hose, you'll need to reverse the path and guide the probe back to where you started.
6. Once you reach that point, the hose should be sanitized.
7. Unlock the case and remove the hose.
8. Allow the sanitizing probe to fall out.

Cleaning the Lumin Bullet Case

The 3B Lumin Bullet should never be immersed in water, as this can cause the loss of the product. Wipe down with a moist cloth, and allow to air dry. Do not use any cleaning solvents or harsh chemicals, as this can damage the Lumin Bullet.

Warnings

• This product is not a toy and should not be handled by small children.
• Do not use in or around water.
• Never drop the Lumin Bullet CPAP hose cleaner as this can cause damage or loss of the product.
• Exercise caution if you have certain implanted medical devices like defibrillators, pacemakers, or any other implanted device. This device uses powerful magnets, and can damage or destroy certain implements if handled incorrectly.
• Do not attempt to use this device with the door open or the device unlatched. The device is designed to shut off and not work when the device is unlatched. Tampering with or attempting to defeat the locking mechanism is not recommended as UVC light can damage eyesight.