Don't miss our deal of the week!

Join our email list! Click here.


    Have a question? Call us!

    1-800-356-5221 Mon-Fri 8AM-8PM CST,
    Sat 8AM-5PM CST

    Product Overview

    Affected by the power outages in California? We're here to help. Give us a call to help make sure you can continue therapy.

    Manufactured by ResMed.

    Product Features

    This product is not currently available for expedited shipping within the continental U.S. Regular ground shipping will be the only option. Other options may be available for non-continental U.S. residents.

    This is a single, replacement or additional battery for use with the Resmed Power Station Battery Kit for S9 Machines and the ResMed Power Station II Battery Kit for AirSense™ 10 & AirCurve™ 10 CPAP Machines.

    The ResMed Power Station (RPS) II has the unique feature of being able to use two batteries to double the run time. Use the Battery Coupler for ResMed Power Station (RSP) II which connects two ResMed Power Station II Batteries in series. The Battery Coupler automatically switches from one battery to the other when needed. The Battery Coupler Kit for ResMed Power Station (RSP) II includes both the Battery Coupler and a Velcro Strap for ResMed Power Station (RPS) II to secure the batteries to one another.

    Other components, which are required to use the battery with a S9 or AirSense™ /AirCurve™ 10 Series CPAP or VPAP machine, are not included with this product. To locate the inclusive kit, visit the Resmed Power Station Battery Kit for S9 Machines page which has all of the parts needed to power a S9 machine with the battery, or the ResMed Power Station II Battery Kit for AirSense™ 10 & AirCurve™ 10 CPAP Machines page which has all of the parts needed to power an AirSense™ or AirCurve™ 10 machine.

    Check ResMed's compatibility list for more information: ResMed Battery/device compatibility list.


    Return On Warranty Issues Only

    Specifications

    This Product Includes...

    • Battery
    • Manual

    Product Specifications

    The equivalent lithium content of a single RPS II batterymeets requirements for safe travel as set by the IATA.

    • Battery Dimensions: 9.06 in L x 4.96 W x 1.02 H
    • Weight - Battery Pack Alone: 2 lbs
    • Battery Amp Hours: 8 Ah
    • Charging Time: 4 Hours
    • Battery Warranty: 6 Months
    • Shelf Life of Charge: Up To 3 Months
    • Recharging Requirement: Battery MUST Be Recharged Every 3 Months To Maintain Functionality
    • Battery Life: 500 Charging Cycles
    • Input Voltage: 100-240V

    CPAP.com always offers these services:

    • 8 am to 8 pm CST Toll Free Phone and Email Support
    • 24 hour access to our CPAPtalk.com Support Forum
    • Learning Center for information on sleep apnea and cpap equipment
    • Consumer Purchasing Trends Reports
    • Warranty Services for all items purchased through CPAP.com
    • Insurance Compliant Invoices
    • Free Prescription Request System

    Manufacturer Note

    • Some product images supplied by ResMed © ResMed 2010 Used with Permission.
    • ResMed products are for sale only to patients within the U.S. and not to other third parties or businesses.
    • All services provided by CPAP.com, including advertisement, ordering, sale, delivery, instruction, and setup of the products are performed solely by CPAP.com and independently of the manufacturer.

    Important Tips

    "justify"="">

    User Manual:

    The user manual included with this battery can be viewed and downloaded here: Power Station User Guide.

    ResMed FAA Compliance Letter: To view the ResMed FAA Compliance Listing click: HERE.

    Please note: The RPS II has a voltage output selector on the back panel of the unit which can be used to change from 24v to 26v power. All S9 or AirSense™/AirCurve™ 10 CPAP and VPAP devices require 24v with and without the use of a humidifier.

    To Power an S9 or AirSense™/AirCurve™ 10 Machine on the ResMed Power Station:

    • Select "24v" output on the back panel of the ResMed Power Station
    • Connect the S9 Series DC Cable for ResMed Power Station (RPS) II or AirSense™/AirCurve™ 10 Series DC Cable for ResMed Power Station (RPS) II to the ResMed Power Station
    • Remove the cap from the other end of the S9 or the AirSense™/AirCurve™ 10 Series DC Cable for ResMed Power Station
    • Connect the uncapped end of the S9 or the AirSense™/AirCurve™ 10 Series DC Cable for ResMed Power Station to the S9 or AirSense™/AirCurve™ 10 machine in the port, where the power cord is normally connected to the machine
    • Turn on the ResMed Power Station
    • Turn the S9 or AirSense™/AirCurve™ 10 machine on as normal

    The ResMed Power Supply Unit (PSU) Adapter for both the S9 and the AirSense™ 10/AirCurve™ 10 machines are NOT used to operate the RPS II. During use, the S9 or AirSense™/AirCurve™ 10 Series DC Cable for ResMed Power Station (RPS) II connects directly between the RPS II and the S9 or AirSense™/AirCurve™ 10 machines.

    The S9 Series DC Cable for ResMed Power Station (RPS) II and the AirSense™ 10 and AirCurve™ 10 Series DC Cable for ResMed Power Station (RPS) II are for use ONLY with the ResMed Power Station II and are not compatible with other DC sources.

    To Charge the ResMed Power Station:
    • Connect the Power Supply Unit (PSU) Adapter for ResMed Power Station (RPS) II to the ResMed Power Station
    • Connect the External Power 90 Watt Supply for ResMed S9 Series Machines or the External Power 90 Watt Supply for ResMed AirSense™ 10/AirCurve™ 10 Series Machines to the PSU Adapter
    • Plug the S9 or the AirSense™ 10/AirCurve™ 10 Power Supply into an AC wall outlet
    • The "charging" light will show until the battery is fully charged
    • If unused, the battery MUST be recharged every three (3) months

    Depending on the machine being used, the Power Supply Unit (PSU) Adapter for S9 Machines for ResMed Power Station (RPS) II or the Power Supply Unit (PSU) Adapter for AirSense™ 10 and AirCurve™ 10 Machines for ResMed Power Station (RPS) II are required to charge the RPS II. The PSU connects the RPS II to both the S9 External Power Supply and the AirSense™ 10/AirCurve™ 10 Power Supply.

    The S9 Power Supply Unit and the AirSense™ 10/AirCurve™ 10 Power Supply Unit that come standard with all S9 or AirSense™ 10/AirCurve™ 10 machines are used to charge the ResMed Power Station II. The S9 and AirSense™ 10/AirCurve™ 10 power supply are not included with the battery.

    The manufacturer warranty for the ResMed Power Station II is 6 months.

    Recharging Requirement: When storing the ResMed Power Station, if it is unused for a period of THREE (3) months the battery MUST be recharged to maintain the functionality of the battery. Per the manufacturer, if the battery is not recharged it will eventually discharge completely and no longer be able to be recharged and there will not a way in which to recover the functionality of the battery.

    Please contact CPAP.com with questions. Call toll free: 1-800-356-5221 or email to cpap@cpap.com.



    Replacement Parts


    mgctlbxN$MZP mgctlbxV$5.2.5 mgctlbxL$C

    Get Help