"VERIFIED CPAP.COM CUSTOMERThe Hosebuddy is an extremely well-designed and manufactured product. It greatly simplifies turning over in bed. I would not want to live without it."
November 26, 2006
Manufactured by HoseBuddy Systems LLC.
The HoseBuddy Tangle Free CPAP Hose Suspension System from HoseBuddy Systems LLC fits between the mattress and the box spring to lift the CPAP hose above the user while they sleep.
- Swivel Arm
The steel arm of the HoseBuddy swivels in a 360 degree motion to allow for optimum movement throughout the night. This feature is designed to prevent hose interference during sleep.
The Travel HoseBuddy is very easy to use. Once the pieces are installed, place the HoseBuddy between the mattress and the box spring for functional assistance. To install the fully adjustable HoseBuddy, follow these steps:
- Insert the stand under the mattress
- Attach the hose to the holder
- Adjust the height between 34 and 37 inches
If you have problems with water condensation in your hose or mask, the HoseBuddy CPAP Hose Holder can provide the clearest path of resistance so that moisture cannot collect.
The original HoseBuddy Suspension Systems only weighs 4.5 pounds. The equipment is lightweight, yet it is durable. When the equipment is not holding a tube, the user may even decide to hang the mask from the hook.
Also, the HoseBuddy now comes with a 4" inch Foam Headboard Protector. Use this to guard against damaging your bed's headboard.
If using a very tall mattress consider the HoseBuddy Plus Tangle Free CPAP Hose Suspension System which extends to 45 inches in height.
Consider Travel HoseBuddy Tangle Free CPAP Hose Suspension System for a lighter weight HoseBuddy with a travel case is more useful.
Free Returns Less Shipping 30 Days From Purchase
This Product Includes...
- HoseBuddy Unassembled - 3 Parts
- 3 - Velcro Straps Attached to Poles
- 1- Foam Head Board Protector
- Instruction Sheet
- Petroleum Jelly Packet - .5gm
- Nylon Washer & Rubber Grommet
Weight of HoseBuddy: 4.5 lbs
Maximum Height: Approx. 37 inPoles & Base Material: American Steel
Dimensions of Parts:
- Part A (Pole With Hook) Height: Approx. 19.25 in
- Part A Hook Length: Approx. 8 in
- Part B (Middle Pole) Height: Approx. 19.25 in
- Part C (Triangular Base): Approx. 10.5 in Length x 9 in Width
- Velcro Straps (Wrapped Around Poles): Approx. 7.75 in Length x 1 in Width
CPAP.com always offers these services:
- 8 am to 8 pm CST Toll Free Phone and Email Support
- 24 hour access to our CPAPtalk.com Support Forum
- Learning Center for information on sleep apnea and cpap equipment
- Consumer Purchasing Trends Reports
- Warranty Services for all items purchased through CPAP.com
- Insurance Compliant Invoices
- Free Prescription Request System
Once the HoseBuddy pieces are installed, place the device between the mattress and the box spring. The HoseBuddy system will require the support of the mattress and box spring to keep the unit firmly fastened and functional.
Use with Adjustable Beds
Because this product is used by being secured between a mattress and box spring, extreme care should be taken when using with an adjustable bed. If the mattress is adjusted, it could result in damage to CPAP equipment if it falls. CPAP.com is not responsible for any damage to CPAP equipment in this situation.
30 Day Satisfaction Guarantee
If not completely satisfied with the product, the manufacturer offers a 30 day money back guarantee. Simply contact CPAP.com for Return Authorization and instructions within the first 30 days of purchase.
The parts and materials are protected against failure. The manufacturer will repair or replace any defects due to quality of materials or workmanship.
What is the difference between the original HoseBuddy and the new Travel HoseBuddy?
The Travel HoseBuddy is constructed from thinner metal, adjusts to 30 inches, weighs 1.6lbs, and comes with Travel Case. The Original HoseBuddy weighs 4.5lbs, raises to 33 inches and does not come with a Travel Case. The Original HoseBuddy also comes with a hook to hang your mask and the Travel HoseBuddy does not.
This device works best fitted directly above your head, but may also be used at the very top side of the bed to avoid contact with a headboard.
The HoseBuddy CPAP Hose Holder can also be used with oxygen units.
Customer ReviewsView All Reviews
CPAP Video & FAQ
Frequently Asked Questions (FAQs)
- What is CPAP tubing / CPAP hose?
- CPAP tubing and CPAP hose are interchangeable terms. CPAP hoses / tubing are used for two main purposes: to connect a CPAP or BiLevel machine or a humidifier to a mask, or to connect the machine to a humidifier.
Machine to Mask Hose. A hose is connected to the air outlet of either the machine or humidifier and it connects to the CPAP mask to deliver the airflow to the mask. In the past, the hose used to connect a machine to mask was a standard size. Today, there are a number of different hose options. There are three types of machine to mask hoses:
- Standard / Performance Hose: A long hose or tube is included with each CPAP / BiLevel machine purchase. The connections on all CPAPs, humidifiers and masks are a standard size, so a standard CPAP hose will fit on all. Standard hoses are also available in 8 foot and 10 foot sizes. There are lighter hoses available that were designed to be more flexible and put less pull on the CPAP mask.
- Heated Hose: A heated CPAP hose contains copper coils embedded in or wrapped around the length of the hose. These coils conduct a constant temperature through the hose. The majority of heated hoses are specific to the machine.
- Hose with Sensor Line: A few auto-titrating CPAPs and Bilevels require a pressure line sensor fitted into the hose to detect breathing patterns and pressure needs but the majority of those machines are no longer in production. (Machines which use the tubing pictured below have been discontinued by the manufacturer.)
Humidifier Hose. Humidifier hoses connect a CPAP or BiLevel machine to a stand alone humidifier. Humidifier hoses are shorter than standard hoses. They come in either 18 or 24 inch lengths.
- Are all CPAP hoses the same?
- In years gone by, the answer to this question would have been "yes", but today not all hoses are the same and some machines use different hose types. All CPAP hoses / tubings serve the same function: directing the air stream from the machine to the mask.
Historically, a standard CPAP hose is six feet long, has an internal diameter of 19mm and a connector cuff with an internal diameter of 22mm. Today some hoses are 6 feet long, others are 4 foot long, 8 foot long and 10 foot long. Some hoses have an internal diameter of 19mm (standard) and others have an internal diameter of 15mm (thin or slim style). To use a slim 15mm hose, the machine must have a menu option setting to accept the narrower diameter of a 15mm hose and still deliver the prescribed pressure to the mask to ensure effective therapy.
All hoses have a 22mm connection cuff and fit on all CPAP masks. The connection ports on all CPAP, APAP and BiLevel machines, humidifiers, and masks are a standard size, so a standard CPAP hose will fit on all. Some of the very small machines use a hose adapter between the machine and the 22mm cuff of the hose.
Some manufacturers offer a heated hose option designed to work only with their machines. To read more about heated hoses see the "What is a heated CPAP hose?" article included in this FAQ section.
A few auto-titrating CPAPs and BiLevels require a pressure line sensor to detect breathing patterns and pressure needs. The sensor may be in the form of an adapter with narrow tubing attached or the narrow tubing is threaded inside the six foot hose. In both cases, one end of the narrow tubing is plugged into the machine. Those machines will not operate without the pressure line sensor.
- What is a heated CPAP hose?
A heated CPAP hose contains copper coils embedded in, or wrapped around, the hose. These coils are gently heated to conduct a constant temperature throughout the length of the hose. This enhances the comfort of the therapy and reduces or eliminates rainout caused by the water condensing as it travels through the hose to the mask.
Heated hoses are more expensive alternatives to cloth tubing insulation, but they prevent rainout in nearly all cases. The Hybernite Rainout Control System is a stand alone option that can be used with any machine to prevent rainout and increase delivered humidification.
Some manufacturers have developed heated hoses to work specifically with select machines in their product lines. The ClimateLineAir™ Heated Tube for AirSense™ 10 and AirCurve™ 10 Machines is an example of a heated hose used by the AirSense™ 10 and AirCurve™ 10 Machines.
Here are some heated hoses we carry:
- What is a hose cover?
- A hose cover is placed over the hose in order to insulate the hose and to make the hose more comfortable. The simplest and most cost effective way to insulate a CPAP hose is to wrap it in an insulating fabric. This enables the hose to remain flexible and adds little weight.
Companies such as Snugglehose provide a cost effective tubing insulation available in several colors and styles. Not only will the covers reduce or eliminate rainout, they also provide a more personal and less institutionalized appearance. An example of a Snugglehose is shown below.
Here are some hose covers we carry:
Tubing Wrap for AirSense™ 10, AirCurve™ 10, and S9 Series SlimLine™ Tubing
Respironics Insulated Hose Cover
ResMed Zippered Tubing Wrap
+ See More
- What is rainout?
- Rainout is the accumulation of water in a CPAP tube due to warm moist air cooling on its way from your CPAP machine to your CPAP mask.
Solutions to rainout include raising the temperature of your bedroom, insulating your tubing with a Snugglehose, or purchasing a CPAP machine with an integrated heated hose.
- How do I clean a CPAP hose?
- Your CPAP hose will last longer if it is detached every morning and hung to air dry.
Drying the hose each morning will also prevent bacteria from growing in the damp interior and help reduce the possibility of colds and other health issues. Remember, what is in the hose goes into the airway.
If you are not drying the hose daily, then be sure to replace the hose very frequently as negative health issues will result!
Hose care tips:
- Remove the hose by gripping the end or cuff, not the hose itself
- Hang the hose to dry after each use
- Wash hose weekly to avoid residue and maintain health
- Protect the hose from curious pets
Hose care tools:
- A Hose Quick Connect helps the tube to easily disconnect from the humidifier
- The Tube Cleaning System is a tube care kit to rinse, soak and dry the hose.
- The CPAP Tube Brush Second Gen is used to scrub the inside of a tube. It is available for both slim line and standard diameter hoses.
- A SnuggleHose Cover wraps the length of the tube in soft fleece material. Although its intention is to help reduce rainout (water collecting in the tube) many CPAP users report it deters pets from using the hose as a chew toy. The SnuggleHose is available for 6 foot; 8 foot and 10 foot hoses.
- + See More
- How often should I replace my CPAP hose?
- CPAP hoses can last a long time, sometimes up to a year if taken care of properly.
Signs of wear include dry, cracked places on the inside lining or on the rubber ends; "stretch marks" near the rubber ends; mineral deposits or mold from water left inside the hose; or a visible puncture or tear in the material.
- How do I avoid getting tangled in CPAP hoses?
There are a few ways to keep from getting tangled up in your CPAP tubing. Try running your CPAP hose behind the headboard of your bed. Also, there are several types of suspension systems we carry here at CPAP.com. You can see the different types of Hose Management Systems under our Comfort & Cleaning section. One example is the HoseBuddy Tangle Free CPAP Hose Suspension System: