IntelliPAP AutoAdjust CPAP Machine with SmartFlex

Sound Level: 26 dBA

Machine Dimensions: 4.2 in L x 6.5 in W x 6.9 in H

Machine Weight: 2.75

Machine Warranty: 5 Years

Voltage Requirements:

• Electrical Requirements 100 - 240 AC, 12volt DC

Power Cord Length: 6 feet

Default Machine Settings: 4-20cm H2O

Humidification Available: Yes

Humidification Type: Integrated

Exhalation Relief: Yes

Ramp Mode: Yes

Max Altitude: 9000

DC Capable: Yes

Battery Option: Yes

Compliance Data: Yes

Auto Altitude Adjustment: Yes

Auto Start: Yes

Auto Stop: Yes

Good For:

• New Users

Product Warnings:

WARNINGS

• To avoid electric shock, always unplug power cord from wall outlet power source when performing cleaning.
• Always remove the water chamber from the optional humidifier cradle before filling.
• If water has spilled onto the humidifier cradle or it has been submerged into water, unplug power cord from power source immediately. Allow device to dry completely before use.
• Never block air openings of the humidifier cradle or chamber. Do not insert objects into any openings or tubes.
• For proper operation, place system on a flat, sturdy, level surface.

On-Board Memory and SD Card Requirements

The IntelliPAP AutoAdjust stores up to 90 days of therapy data and up to 3 years of usage data. If an SD memory card is used to retrieve data from the machine it must be a file format of FAT16. CPAP.com offers this card: SD Memory Card for IntelliPAP Machines as an option. SD cards with other formats, such as an SDHC card formatted for FAT32, will not work with the IntelliPAP machine.

Bacteria Filters

A bacteria filter will not install directly to the air outlet port on the IntelliPAP Heated Humidifier. The filter is too bulky and there is not enough space. IntelliPAP humidifier owners can order the FlexiTube Angle Adapter for CPAP and BiPAP Machines to provide a spacer between the humidifier chamber and the bacteria filter. Your CPAP hose can then fit onto the other end of the bacteria filter.

Hose Length Settings

The IntelliPAP AutoAdjust CPAP has two hose length settings: 6 ft and 10 ft. If using an 8 ft hose, the manufacturer recommends using the 6 ft setting. The machine will still automatically adjust to the correct pressure using this setting with an 8 ft hose.

5 Year Manufacturer IntelliPAP Machine Warranty

DeVilbiss offers an industry-leading 5 (five) year manufacturer warranty on IntelliPAP machine orders placed on or after 2/15/2012.

• If the order date for an IntelliPAP machine is 2/15/2012 or later it carries a 5-year manufacturer warranty.
• If the order date for an IntelliPAP machine is 2/14/2012 or earlier it carries a 3-year manufacturer warranty.

Replacement Schedule

• Reusable Foam Filter: Replace Every Six Months
• Disposable Fine Filter: Replace Every Month

Universal Power

The DeVilbiss IntelliPAP system operates automatically between 110v and 240v AC. When traveling either inside or outside the USA, there are no switches to switch or fuses to change. The machine will automatically sense what voltage is needed and set itself to run on that power.

You'll need to adapt the plug that goes into the wall to fit the style of outlet socket that is being used. This is simply done with a Power Adapter Plug kit. This is the same type of plug adapter that would be used with a hair dryer or an electric shaver. World Traveler Power Adapter Plugs.

IntelliPAP 12 volt DC Power Cord

The IntelliPAP Series come equipped with a DC plug on the back of the unit. This allows the user to connect the CPAP to an external DC battery source. The IntelliPAP can be powered by plugging the 12volt DC Power Cord into a cigarette lighter plug. This is ideal for traveling by car, boat, or recreational vehicle that is equipped with a cigarette lighter plug.

Important Note: If you're trying to use the heated humidifier with the IntelliPAP series, you'll find the units cannot be operated from DC power. A modified sine wave inverter of at least 120VAC is necessary to power both the machine and humidifier from a DC power source. CPAP.com carries two inverters that would be compatible:

Battery Backup Option

Because the IntelliPAP machines use a separate connection for AC and DC power, they can be set up in a battery backup configuration. The AC power cord is plugged AC power source such as a wall outlet, and the optional IntelliPAP 12 Volt DC Power Cord is plugged into a DC power source such as a battery. The IntelliPAP will use the AC power source when available, otherwise will convert to the DC power source, without any interruption in therapy. If the AC power source becomes available again, the machine will revert back. If you're using the heated humidifier, it will not function from DC power.

Portable Outlet CPAP Battery

The Portable Outlet is a great way to power this CPAP machine, as well as many others. The Portable Outlet converts the battery's stored DC power into convenient outlet power, allowing you to power any CPAP machine or electrical device using the main power supply that came with the device. The Portable Outlet is so versatile it can power TVs, stereos, blenders... anything! It also includes convenient USB ports that allow you to charge your phone or tablet while charging your CPAP.

Freedom Travel Battery Pack for CPAP Machines

Weighing in at only 1.7 pounds the Freedom Battery is a terrific option for travel. Plus, the Freedom with a DC cable and connector peg suitable for use with the IntelliPAP AutoAdjust Travel CPAP Machine with SmartFlex so no need to purchase a separate DC cable. This lithium ion battery meets UN Manual Test and Criteria requirements for travel.

PLEASE NOTE: The IntelliPAP AutoAdjust CPAP Machine connects to the Freedom Battery using Tip "J". Tip "J" is included with the Freedom Battery.